Installation Guide

ManualsBrandsKuzco Lighting ManualsChandeliersKattari 5 Light 22" Wide LED Abstract Chandelier

19054 28th Avenue Surrey, BC Canada V3S 6M3

T: 604 538 7162 TF: 1-855 85 KUZCO F: 604 538 7196

W: kuzcolighting.com

20160414

2a.

You have now completed the installation of your fixture,

enjoy.

You are now ready to mount the canopy (2a) to the

mounting plate (1c). First connect all wires correctly G

ground to ground (from the canopy), N neutral wire (white

to white), L live wire (black to black) with provided

marrettes (1b) from the hardware package (See Illustra-

tion 2). Align the holes in the canopy (2a) to the threaded

screws (1d) hanging downward from the mounting plate

(1c). Push the canopy (2a) up towards the ceiling so the

two screws (1d) clears through the hole in the canopy (2a).

You can now screw on the decorative nuts (2b) onto the

threaded studs pointing through the canopy to securely

connect the canopy to the mounting plate.

1a.

1b.

2b.

1e.

3a.

1c.

1d.

Remove the fixture from its original packaging. Remove the

mounting plate (1c) from within the canopy (2a) by remov-

ing the decorative nuts (2b). Secure the mounting plate

(1c) to the junction box (1a) with the screws (1e) provided

in the hardware package.

INSTALLATION SHEET

EP7718

LED Exterior Pendants

START FROM HERE

•

Make sure power is completely off at the fuse box.

•

Have your fixture installed by a qualified licensed electrician

•

Prepare everything in a clear area.

•

Wear gloves at all times during this installation.

•

Read instructions carefully before you start assembly.

•

Keep this instruction sheet for future reference.

Technical Support: 1-877-452-6858

Please Note:

• For dimming, an ELV (Electronic Low Voltage) or a TRIAC type of dimmer, UL listed or

equivalent is required.

2c.

Attach the rods (2c) to the pendant (3a) by threading in

clockwise until it is secured. Make sure to fish the wires

from the pendant through the rods and canopy (2a).

Connect the rods and pendant to the canopy by threading

clockwise. (If the input wires from the driver are too

long, please shorten accordingly as an option). Connect

the wires from the LED to the wires from the DC Driver

(black -from LED and black -from driver)(white -from

LED and white -from driver) using the marrettes (2d)

provided in the hardware package. (See Illustration 1

and 2)

2d.

No. Description

QTY

Round Head Screw

Marrette

8-32x1”

Parts Listing for Hardware Kit

Fixture Weight: 8 lb

V+

V-

Driver

Illustration 1

Black

White

Illustration 2

Summary of content (1 pages)

PAGE 1
EP7718 LED Exterior Pendants INSTALLATION SHEET Please Note: • For dimming, an ELV (Electronic Low Voltage) or a TRIAC type of dimmer, UL listed or equivalent is required. START FROM HERE • Make sure power is completely off at the fuse box. • Have your fixture installed by a qualified licensed electrician • Prepare everything in a clear area. • Wear gloves at all times during this installation. • Read instructions carefully before you start assembly. • Keep this instruction sheet for future reference.