Full Product Manual

ManualsBrandsKushlan ManualsBuilding materials10 cu. ft. 1.5 HP 120-Volt Motor Direct Drive Cement Mixer

Kushlan Products, LLC 281-313-2506 OR 800-469-4178

10601 S. Sam Houston Parkway W. STE 140 Fax 281-313-2509

Houston, TX 77071

FEATURES INCLUDE:

Portable Wheelbarrow Mixer

oered with at free or pneu-

mac res.

10 cu. . polyethylene drum will

hold up to 600 lbs.

1-1/2 HP Capacitor start, high

torque, direct drive, brushless

electric motor with gear box.

Drum rotaon 28 RPM with gear

box.

Durable 5/16” gauge steel tubing

frame, with removable handles.

Shipping weight 303 lbs.

Assembled: 45L x 36W x 48H

Summary of content (14 pages)

PAGE 1
FEATURES INCLUDE: Portable Wheelbarrow Mixer offered with flat free or pneumatic tires. 10 cu. ft. polyethylene drum will hold up to 600 lbs. 1-1/2 HP Capacitor start, high torque, direct drive, brushless electric motor with gear box. Drum rotation 28 RPM with gear box. Durable 5/16” gauge steel tubing frame, with removable handles. Shipping weight 303 lbs. Assembled: 45L x 36W x 48H Kushlan Products, LLC 281-313-2506 OR 800-469-4178 10601 S. Sam Houston Parkway W.
PAGE 2
PAGE 3
www.kushlanproducts.com 1-800-469-4178 WARNINGS www.kushlanproducts.com. 1-800-469-4178.
PAGE 4
ADVERTENCIAS SAFETY INSTRUCTIONS For the safety of yourself and others around you, it is extremely important that you observe the following notes.
PAGE 5
Instructions pour le mélangeur E. NETTOYAGE: Ne pas pulvériser de liquide directement sur ou dans le moteur. Il est recommandé de nettoyer soigneusement le mélangeur après chaque utilisation pour prolonger sa vie utile.
PAGE 6
4 Item # Part # Description Qty 1 1000DDWB-01 Machine Bolt m12x70 1 2 1000DDWB-02 Outside Drum Plate with Straight Bushing 1 3 1000DDWB-03 Polyethylene Drum 10.0 cu. ft. 17 in.
PAGE 7
5 7 8 4 3 6 2 23A 23E 5 23E 23 1 10 23B 9 23C 13 9 23D 22 21 12 20 14 11 16 17 19 15 18
PAGE 8
6 Item # Part # Description Qty 1 2 3 4 5 6 7 8 DD-1000 DDMA-02 DDMA-03 DDMA-04 DDMA-05 DDMA-06 DDMA-07 DDMA-08 Gearbox and motor assembly (110V-60Hz) Screw (6x25mm) Seal (40mm) Screw (6x50mm) Gearbox case- front half Gearbox gasket Pin (8x20mm) Locking key for gear and axle (8x7x15mm) 1 1 1 4 1 1 1 1 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 45 46 DDMA-09 DDMA-10 DDMA-11 DDMA-12 DDMA-13 DDMA-14 DDMA-15 DDMA-16 DDMA-17 DDMA-18 DDMA-19 DDMA
PAGE 9
7
PAGE 10
Step 1- Remove all the shrink wrap from parts. Take out all the nuts and bolts from the frame, keeping them together by size. Take the large support channel on the left frame side and bolt the frame side to the large support channel. The lanyard and pin are placed to the outside of the frame .Paso 1 Quite el envoltorio de las partes. Sacar los tuercas y tornillos del marco, manteniéndolos juntos por tamaño.
PAGE 11
Step 7- Take gear motor and remove the 10 mm nuts from the 4 longer mounting bolts in the center of the gear motor. Remove flat washer and lock washer. Step 8- Tighten the 4 nuts on gear motor to 10 pounds of torque. Sometimes they come loose and it is best to tighten to prevent gear motor from leaking oil. Paso 7 tome motorreductor y retire las tuercas de 10 mm de los 4 pernos de montaje más largo en el centro del motorreductor. Retire la arandela plana y arandela de seguridad.
PAGE 12
Step 14- Install drum support kit. Use 43/8” x 2” bolts provided. Install upside down at first. Step 15- Turn drum support upright 15 degrees toward the back of the mixer, or gear motor, as shown in picture. Paso 14-instalar batería de apoyo. Use 43/8 "x 2" tornillos suministrados. Instalar boca abajo al principio. Paso 15-vuelta tambor soporte vertical 15 grados hacia la parte posterior de la mezcladora, o motor del engranaje, como se muestra en la imagen.
PAGE 13
PAGE 14