Datasheet

Edit Setup Mode
The Zone-specic Parameters
8-9
High Velocity
The High Velocity parameter determines the highest velocity that a keystroke must have
in order to trigger a note in the currently selected Zone. You can set this parameter to
any velocity between 0 and 127. Pressing both Value buttons simultaneously will set this
parameter to 127.
If, for example, you set High Velocity to 80, then only keystrokes with velocities of 80 or
below will trigger a note. Keystrokes with velocities higher than 80 will not trigger a note.
Low Key
The Low Key parameter determines the lower boundary of the currently selected Zone.
You can set this parameter to any note from C-1 to G9. Pressing both Value buttons
simultaneously will set this parameter to C-1.
If, for example, you set Low Key to C4, then only keys at or above C4 will trigger a note for
the currently selected Zone. Keys below C4 will not trigger a note.
High Key
The High Key parameter determines the higher boundary of the currently selected Zone.
You can set this parameter to any note from C-1 to G9. Pressing both Value buttons
simultaneously will set this parameter to G9.
If, for example, you set High Key to C4, then only keys at or below C4 will trigger a note for
the currently selected Zone. Keys above C4 will not trigger a note.
Bend Range Down
The Bend Range Down parameter determines the lower bend of the Pitch Wheel. You can
set this parameter to any value between 0 semitones and 127 semitones, or to Prog, which
uses the Bend Range of the currently selected Program for the Zone. Pressing both Value
buttons simultaneously will set this parameter to 12 semitones.
Bend Range Up
The Bend Range Up parameter determines the upper bend of the Pitch Wheel. You can
set this parameter to any value between 0 semitones and 127 semitones, or to Prog, which
uses the Bend Range of the currently selected Program for the Zone. Pressing both Value
buttons simultaneously will set this parameter to 2 semitones.