Operation Manual

7 SPEEDOMETER 27
7.20 Display mode SPEED/A2 (average speed 2)
400326-01
– Repeatedly press the button briefly until A2 appears at the top right of the dis-
play.
A2 (average speed 2) shows the average speed on the basis of the current speed if the
stop watch S2 (stop watch 2) is running.
Info
The displayed value can differ from the actual average speed if S2 was not
stopped after the ride.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
7.21 Display mode SPEED/S1 (stop watch 1)
400327-01
– Repeatedly press the button briefly until S1 appears at the top right of the dis-
play.
S1 (Stop watch 1) shows the riding time based on TR1 and continues running as soon
as an impulse arrives from the wheel speed sensor.
The calculation of this value starts with the first impulse from the wheel speed sensor
and ends 3 seconds after the last impulse.
Press the button
for 2–3 seconds.
Displays of TR1, A1 and S1 are reset to 0,0.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
No function
7.22 Display mode SPEED/S2 (stop watch 2)
400328-01
– Repeatedly press the button briefly until S2 appears at the top right of the dis-
play.
S2 (Stop watch 2) is a manual stop watch.
If S2 is running in the background, the display S2 flashes on the speedometer.
Press the button
for 2–3 seconds.
The displays of S2 and A2 are set to 0,0.
Briefly press the
button .
Next display mode
Press the button
for 2–3 seconds.
No function
Briefly press the
button .
Starts or stops S2.