Installation guide

-19-
2.10 Configuring IP Address and Password for the Device
For managed model, the device unit is shipped with the following factory default settings for software
management :
Default IP address of the device : 192.168.0.2 / 255.255.255.0
The IP Address is an identification of the device unit in a TCP/IP network. Each unit should be desig-
nated a new and unique IP address in the network. Refer to Web management interface for System
Configuration.
The managed device is shipped with factory default password 123 for software management. The
password is used for authentication in accessing to the device via web-based interface. For security
reason, it is recommended to change the default settings for the device unit before deploying it to your
network. Refer to Web management interface for System Configuration.