www.kruggusa.
www.kruggusa.com DANGER Risk of personal injury. To avoid possible electrical shock, the electricity must be turned off at the circuit breaker or fuse box before attemting any installation procedure. Risk of personal injury. To avoid possible electrical shock, the mirror must be properly grounded. CAUTION Total/Maximum shelf load 34lbs/15.
www.kruggusa.com WARNING All fittings must be installed in accordance with current IEE wiring regulations. If in doubt, consult a qualified electrician. NOT suitable for above baths or Zone 1 not for installation in Saunas, Steam Rooms or Shower Cubicles. Suitable for indoor use only. Switch off the electrical supply at the main circuit board BEFORE installation and maintenance. DO NOT fix to damp or conductive surfaces. Site well away from curtains and fabrics.
www.kruggusa.
www.kruggusa.com IMPORTANT - BEFORE YOU BEGIN Inspect the product immadiately upon receipt for transit damage or missing parts. Handle the product with care and protect against knock to all sides and edges of the glass. Make sure that you have all the tools you need to complete the job. (SEE BELOW) Ensure ther are no hidden pipes or cables in the wall before drilling. If drilling holes in ceramic tiles use a piece of masking tape on the tile to stop the drill bit from slipping.
www.kruggusa.com WARNING The Lead Contains 3 Wires: COPPER WIRE (GREEN) = GROUND WIRE...Connect to GROUND WIRE in your box, or to the box as a ground. WHITE (or BROWN) = NEUTRAL WIRE... Connect to the WHITE NEUTRAL WIRE in your box. BLACK (or BLUE) = HOT WIRE... Connect to the BLACK HOT WIRE in your box. Suitable for indoor use only. DO NOT fix to damp or conductive surfaces. Site well away from curtains and fabrics. Never cover the mirror. Switch off after use.
www.kruggusa.com RECESS MOUNT INSTALLATION Carefully remove side mirror panels Remove door prior to mounting your cabinet. Start with unplugging the door from the cabinet While supporting the door release (the leavre under the hinge arm), slide the door off the frame.
www.kruggusa.com CONNECTING CABINETS (OPTIONAL RECESS MOUNTING) Connect cabinets with connector s provide at top, middle and bottom.
www.kruggusa.
www.kruggusa.
www.kruggusa.com SURFACE MOUNT INSTALLATION 1 Remove door prior to mounting your cabinet. Start with unplugging the door from the cabinet 2 While supporting the door release (the leaver under the hinge arm), slide the door off frame.
www.kruggusa.
www.kruggusa.
www.kruggusa.
www.kruggusa.
www.kruggusa.
www.kruggusa.
www.kruggusa.com A - Cabinet’s Width B - Cabinet’s Heights C - Cabinet’s Depth SVANGE 2430 Note: All dimensions & specifications are approximate and subject to change without notice.
www.kruggusa.com FRONT INTERIOR SIDE BACK E. B. G. C. B. D. H. D. F. E. A. C. A. FRONT & INSIDE 24 1-1/4 MODELS A B C D E ELECTRIC CURRENT WATTAGES SVANGE 2430 23 29-1/2 4-3/4 30 3-1/2 0.
www.kruggusa.com USE AND MAINTENECE The interior is constructed of mirrored glass and aluminium. Use only a damp cloth to clean. Ammonia or vinegar-based cleaners can damage mirrors. When cleaning, spray the cloth, not the mirror, or surrounding surfaces. Do not use abrasive cleansers on any part of the light fixture.