Use and Care Manual

TECHNICAL DATA KRK-22

KRUD KUTTER

ADHESIVE REMOVER

Form: GDH-541

Rev.: 100615

.DESCRIPTION AND USES .

Krud Kutter

Adhesive Remover is a water-based,

biodegradable formula that is a safe, effective alternative

to hazardous, solvent-based adhesive removers.

Removes most glues and adhesives, carpet seam sealer,

and mastic. It also removes dirt, grease, grime, heel marks

and floor wax. Not recommended for varnished surfaces.

FEATURES .

 Water-based

 Biodegradable

 Non-toxic

 Non-flammable

PRODUCTS .

SKU Description

AR324 32 oz. Trigger Sprayer

AR014 1-Gallon Bottle

AR05 5-Gallon

AR55 55-Gallon Drum

PRODUCT APPLICATION .

DIRECTIONS

Always test on inconspicuous area first. Saturate the

adhesive by applying a liberal amount directly onto the

finish. Allow time for the remover to work. It will loosen

most finishes in 15-30 minutes. Test scrape a small area

to see if finish is ready for removal. Scrape away the

softened adhesive with a wide putty knife or scraper.

Multiple coats or stubborn finishes may require repeat

applications. For final clean-up, apply onto the surface

and wipe clean. Before installing new floor covering, allow

surface to dry for 1 hour or more.

CAUTION: EYE AND SKIN IRRITANT. In case of contact

with eyes or skin, flush with water for at least 15 minutes.

If irritation persists, seek medical attention. If swallowed,

take large amounts of water. Do not induce vomiting. Get

medical attention.

KEEP OUT OF REACH OF CHILDREN.

PAGE 1
TECHNICAL DATA KRK-22 KRUD KUTTER® ADHESIVE REMOVER .DESCRIPTION AND USES PRODUCT APPLICATION . DIRECTIONS ® Krud Kutter Adhesive Remover is a water-based, biodegradable formula that is a safe, effective alternative to hazardous, solvent-based adhesive removers. Removes most glues and adhesives, carpet seam sealer, and mastic. It also removes dirt, grease, grime, heel marks and floor wax. Not recommended for varnished surfaces. FEATURES     Always test on inconspicuous area first.
PAGE 2
TECHNICAL DATA KRUD KUTTER® ADHESIVE REMOVER .PHYSICAL PROPERTIES . ADHESIVE REMOVER Composition Proprietary Blend of Biodegradable Surfactants, Detergents and Emulsifiers Solvents Weight Water Per Gallon 8.42 lbs. Per Liter 1.01 kg Color Light Yellow Clarity Clear Liquid Odor Mild pH (Concentrate) 12-13 VOC (Weight %) 5.0% Practical Coverage Varies with type and porosity of surface Shelf Life NA Flash Point Caution! >200°F (93°C) CAUTION: EYE AND SKIN IRRITANT.