Instructions / Assembly

LED Animated Outdoor Lightshow Tree
Indoor / Outdoor 14 Repeated Light Show Animations
Expand the light show tree base.
Screw the lower tube to the base. Then screw
the next tube into the lower tube and repeat as
needed. The power cord is pre-threaded through
the tubes. Connect the star plug to the tube plug.
Twist the plug ends to lock them together.
Outdoor: Ax the light show tree base frame to
the ground using ground stakes.
Ax the square metal plate to the base with
the included bolts. Insert bolts at both sides
of the base to secure the base.
(Note: bolts used vary by model)
Insert the star top. Then remove the twist
tie from a strand of lights and hook the
strand to one of the pre-drilled holes in the
base using the included S-hooks. Repeat
this process for each strand and attach the
strands around the base.
TIP: By only undoing one strand at a time,
it reduces the liklihood of strands tangling,
which saves time. Keep the twist ties and
use them again when you store the tree.
1 2
3
5
4