INSTALLATION GUIDE Air Gap KAG-1 KAG-2 www.kraususa.com I Toll Free: 1.800.775.0703 I © 2019 Kraus USA Inc. I REV.
Congratulations on the purchase of your new Kraus plumbing fixture! Please keep the box and packaging materials until your product is completely installed. If you have any questions, require technical assistance, or have any problems with your product: DO NOT RETURN TO STORE Please contact our Customer Service Team 1-800-775-0703 / customerservice@kraususa.com Have the model number available, and retain a copy of your receipt with purchase date for reference.
PRIOR TO INSTALLATION • Make sure you have all necessary parts by checking the diagram and parts list. If any part is missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a replacement • Pre-drilled hole size requirement: 1 3/8” • Max countertop thickness: 1 1/4” For technical assistance or replacement parts, please contact Kraus Customer Service and one of our representatives will be happy to help: Toll-Free: 800.775.0703 or customerservice@kraususa.
Diagram and Parts List: A A. Cap B. Nut & Washer B C C. Washer D. Nut D.
[46.3mm] [227.1mm] 2 1/2” [63.0mm] 1 7/8“ 9” [31.1mm] 1 1/4” Dimension [46.
Step 1 Remove the cap (A) and nut & washer (B). A&B Step 2 Insert the air gap body (E) through the sink deck hole, leaving approximately 2-1/4" (57 mm) of the body showing above sink deck. (Back the nut (D) down if necessary).
Step 3 Thread the cap (A) and the nut & washer (B) fully onto body, with the slotted vents (1) facing the wall. Tighten the nut (D) firmly. Note: The air gap is to be installed so that the flood level mark (F/L) shall be at or above the flood level of the sink or other receptacle which may be connected to the sanitary drain into which the air gap discharges. A&B (F/L) 1 D Step 4 Connect the dishwasher outlet hose (5/8 '' I.D.
Replacement Parts Replacement Parts List Finish / Color 1 1. Cap 2 3 4 *Denotes faucet component color options: CH - Polished Chrome SFS - Spot Free Stainless Steel MB - Matte Black ORB - Oil Rubbed Bronze BG - Brushed Gold SB - Black Stainless BB - Brushed Brass SFACB - Spot Free Antique Champagne Bronze SFSB - Spot Free Black Stainless Part # KP27179 CH, SFS, MB, (For KAG-1) ORB, BG, SB, BB, KP27180 SFACB, SFSB* (For KAG-2) 2. Nut & Washer KP27192 3. Washer KP27182 4.
Kitchen Accessories Warranty Kraus products are manufactured and tested to the highest quality standards by Kraus USA Inc. (“Kraus”). Kraus extends this warranty to the original purchaser for personal household use of the “Kitchen Accessories” in their original location. The warranty is non-transferable. Kraus warrants the structure and finish of the product (Kitchen Accessories) to be free from defects in material and workmanship under normal usage for a period of one (1) years.
This warranty does not cover labor charges or costs of removal and reinstallation of said product. This warranty does not allow recovery of incidental or consequential damages such as loss of use, delay, property damage, or other consequential damages, and Kraus accepts no liability for such damages. This warranty does not cover Marine or Outdoor Installation.
If you are a HOMEOWNER please contact a Kraus Customer Service Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 Toll-free 800-775-0703 Customerservice@kraususa.com If you are a PLUMBING CONTRACTOR OR TRADE PROFESSIONAL please contact a Kraus Pro Representative at: Kraus USA, Inc. 12 Harbor Park Drive Port Washington, NY 11050 516-801-8955 Proservice@kraususa.com If you are an AUTHORIZED PARTNER please contact a Partner Support Representative at: Kraus USA, Inc.
IMPORTANT Register Your Kraus Product Activate Your Warranty Access Premium Customer Support Get Product Information REGISTER TODAY http://www.kraususa.
