Use and Care Manual

ManualsBrandsKoolmore ManualsAppliances60 in. 6 Burner Commercial Double Oven Gas Range with 24 in. Griddle and Broiler Liquid Propane in Stainless Steel

GAS RANGE

User Manual

Commercial Gas Range

Models:

KM-CR24-NG, KM-CR24-LP, KM-CR36-NG, KM-CR36-LP, KM-CRG3660-NG, KM-CRG3660-LP,

KM-CRG4860-NG, KM-CRG4860-LP, KM-CR36CO-LP, KM-CR36CO-NG, KM-CR36CO-LP,

KM-CR36S2L-NG, KM-CR36S2L-LP, KM-CRG1236-NG, KM-CRG1236-LP, KM-CRG36-NG,

KM-CRG36-LP, KM-CRG60-NG, KM-CRG60-LP, KM-CR60-NG, KM-CR60-LP, KM-CRG3636-NG,

KM-CRG3636-LP, KM-CRG60-NG, KM-CRG60-LP, KM-CRGB60-NG, KM-CRGB60-LP

Contents

1. Functional Introduction……………………………………2

2. Structural & Functional Features...………………………2

3. Precautions & Recommendations.………………………3

4. Working Instructions & Operation Flow…………………5

5. Routine Inspection.......……………………………………7

6. Cleaning & Maintenance.…………………………………8

7. Failure Analysis & Trouble Shooting.……………………9

8. Backsplash Assembly Instruction..………………………10

9. Basic Features & Parameters..…………......……………11

10. Wiring Diagram for Convection Oven..……………...…12

For any service-related Issues, please contact us:

Phone Number: 718-576-6342

Email address: support@koolmore.com

Summary of content (16 pages)

PAGE 1
GAS RANGE User Manual Commercial Gas Range Models: KM-CR24-NG, KM-CR24-LP, KM-CR36-NG, KM-CR36-LP, KM-CRG3660-NG, KM-CRG3660-LP, KM-CRG4860-NG, KM-CRG4860-LP, KM-CR36CO-LP, KM-CR36CO-NG, KM-CR36CO-LP, KM-CR36S2L-NG, KM-CR36S2L-LP, KM-CRG1236-NG, KM-CRG1236-LP, KM-CRG36-NG, KM-CRG36-LP, KM-CRG60-NG, KM-CRG60-LP, KM-CR60-NG, KM-CR60-LP, KM-CRG3636-NG, KM-CRG3636-LP, KM-CRG60-NG, KM-CRG60-LP, KM-CRGB60-NG, KM-CRGB60-LP Contents 1. Functional Introduction……………………………………2 2. Structural & Functional Features...
PAGE 2
WARNING • Any self-modification, incorrect installation, adjustment, or maintenance may result in property loss or injury. Please contact the manufacturer for any adjustments or maintenance, and ensure that the work is done by a trained and qualified person. • For your safety, keep the machine away from any liquids, gases, or other objects that are flammable or explosive. • Ensure that the area around the appliance is free from combustible materials.
PAGE 3
Dear User and Client, Thank you for purchasing and using our product. This user's manual contains all the necessary information and guidelines that comply with applicable regulations. We have accumulated knowledge and experience from our long-term involvement in projects and current development situations. Please note that due to special structures, additional specified items, or new technology changes, the actual usage situation may differ from what is stated in this user manual.
PAGE 4
2. Precautions & Recommendations 2.1 Transportation and Storage During transportation, the machine should be handled with care and should not be turned upside down to prevent damage to the shell and internal components. The packaged machine should be stored in a well-ventilated warehouse free from corrosive gases. If it needs to be stored in an open-air environment temporarily, measures should be taken to protect it from rain. 2.2 Notice for Installment 1.
PAGE 5
2.3 Special Notice 1. The installation, first use, and maintenance of this device should only be carried out by professional personnel or qualified individuals. 2. Please ensure the integrity of the appliance and remove the outer packaging. If you have any questions or concerns, please contact a specialist and refrain from using the appliance. If there is any danger, keep the packaging materials away from children, as they may include plastic bags, nails, and other hazardous items. 3.
PAGE 6
2.4 Griddle Seasoning Caution: Although this griddle plate is made of steel, the surface is relatively soft and can be easily scored or dented by the careless use of a spatula or scraper. To avoid damaging the plate surface, be careful not to dent, scratch, or gouge it. Do not attempt to knock off any loose food that may be on the spatula by tapping the corner edge of the spatula on the griddle surface. To ensure optimal cooking performance, the griddle surface must be seasoned before its first use.
PAGE 7
Hot Top and Griddle Top Burners: 1. Connect the gas supply to the device and use a lighter to ignite the pilot flame. If the device has not been used for a long time or is being used for the first time, it is normal for the ignition to take a little longer (approximately two or three minutes). It is recommended to use a long lighter to ignite the griddle pilot through the pilot holes, as shown in the figure below: 2.
PAGE 8
4. Routine Inspection Regular inspection is essential to ensure the safe and efficient operation of the machine. It is recommended to perform routine checks on a regular basis to prevent serious accidents. If the user notices any issues with the circuit or machine, it is important to stop using it immediately and address the problem. Before Each Use Before each use of the machine, it is recommended to perform the following checks: • Check the levelness of the machine to ensure it is not tilted.
PAGE 9
5. Cleaning & Maintenance Regular cleaning and maintenance of the device is essential to ensure its safe and efficient operation. Before beginning any cleaning, make sure to turn off the device and the gas valve upstream of it. Cleaning: • Clean the burners and tray regularly to remove any debris that has accumulated. • Clean the stainless steel surface with warm soapy water every day and rinse it completely. Do not use a water cannon to spray the device directly, as this could damage its components.
PAGE 10
7. Failure Analysis & Trouble Shooting Symptoms Causes 1. The gas pressure is not enough. 2. The nozzle is blocked. The pilot flame cannot be ignited. The pilot flame is on but the main burner cannot be ignited. When the gas supply is shut off, it produces a light-back sound. Produces red flame, and it emits black smoke. Solutions 1. Adjust the relieve valve to get a proper pressure. 3. Connection of the thermocouple is loose. 2. Unblock the nozzle. 4. The thermocouple is defective. 4.
PAGE 11
8. Backsplash Assembly Instruction: Cover Cover Support (for 60” only) Front Panel Panel Support Back Panel 1. Open the package and remove the backsplash components. 2. Assemble the required components according to the upper figure. 3. Slide the back panel into the front panel from the bottom of the front panel. 4. Align the holes and use four pieces of #10 sheet metal screws to fasten the front and back panels together firmly from the backside. 5.
PAGE 12
9. Basic Features & Parameters Model KM-CR24-LP/NG KM-CR36-LP/NG KM-CR36CO-LP/NG KM-CR60-LP/NG Dimension（inch） 23.9*32.6*60.3 36*32.6*60.3 36*42.3*61.2 60*32.6*60.3 Oven Size（inch） 20.6 25.8 13.7 26.8*25.8*13.7 26.8*26.1*14 26.8*25.8*13.
PAGE 13
Model KM-CRG3636-LP/NG KM-CRG3660-LP/NG KM-CRG4860-LP/NG KM-CR36S2L-LP/NG Dimension（inch） 36*32.65*60.3 60*32.64*60.3 60*32.6*60.3 36*32.6*60.3 Oven Size（inch） 26.8*25.8*13.7 26.8*25.8*13.7 26.8*25.8*13.7 26.8*25.8*13.
PAGE 14
Warranty Limited Service Warranty Valid only in the United States 1 Year Parts and Labor Warranty Unless otherwise stated, Koolmore Supply Inc. warrants to the original purchaser of new Koolmore product, that such equipment will be free from defects in material and workmanship for a period of 1 year from the date of delivery. Valid only in the Continental United States.
PAGE 15
PAGE 16
4 x 30000BTU