User manual

7-4 Job Memory
Job Memory
Job Recall
Use Job Recall to recall jobs that are already stored in Job Memory.
❒ Interrupt mode cannot be used while in Job Memory
Job Memory Mode
Check Mode
NOTES:
1 A locked job is indicated by a lock icon on the Job key number.
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is stored under that key.
5 Job Memory entries can be recorded on the Job Memory Form included at the end of this section.
1 Place original(s) in RADF as required for the job you are about to recall.
2 Press the [JOB MEMORY] key to display the Job store/recall screen.
Each screen displays three jobs at a time, starting with frames numbered from 1~3. (Use the
[F4] to scroll through each of four screens to reach all 12 job numbers.)
3 Press [F1] ~ [F3] under the frame of the desired job No. to complete the selection and
return to the Basic screen.
The copier will be set to the correct job specification, automatically.
To cancel the job, press [AUTO RESET].
4 Press [START PRINT].
Job store/recall screen
Check screen