User manual

Basic Operations 5-11
Basic Operations
The Basic Screen (continued)
Lens Mode (continued)
Preset and User Set Ratios
Use the Preset and User Set ratios to increase or decrease magnification in fixed amounts.
Six Preset ratios are initially set as shown below, and are adjustable in the Key Operator mode, if
necessary. In addition, three User Set ratios are adjustable by the key operator. All ratios remain
effective until they are replaced.
❒ 1:1 mode (no magnification)
❒ 6 Preset ratios: 50%, 65%, 77%, 129%, 155% and 200%
❒ 3 User set ratios: Programmable by key operator as selected from 50%~200%
❒ To copy 5.5"x8.5" originals to 5.5"x8.5" copy paper, select 5.5"x8.5" Copy Size, then select 100% magnification.
1 Press [F3 (1:1)] to enter the Magnification selection screen.
2 Press [F3 (▼)] and [F4 (▲)] to select PRESET. The selected PRESET will be highlighted
and the PRESET ratio will be displayed.
Or, press [F2 (USERSET)] to select USER 1, 2 or 3. The selected USER indicator will be
highlighted and the User set ratio will be displayed.
3 Press [OK] to complete the setting and return to the Basic screen.
To cancel the setting, press [AUTO RESET].
4 When all settings are acceptable, press [START PRINT].
Basic screen Magnification selection screen