User manual

3-12 Machine Information
Machine Information
Key Operator Settings
The Key Operator can change settings and customize the copier so that it handles the needs of
your particular working environment. See Section 9 to review the entire list of Key Operator
functions that are available to you.
Auto Low Power Timer
The Auto Low Power Timer enables you to maintain a lower fixing temperature during periods of
copier inactivity. When Auto Low Power Timer is on, all other indicators will be off; and the initial
mode displays a dimmer back-lit message.
The Auto Low Power Timer is available in the Application selection mode; Basic mode; or during
idling. Auto Low Power Timer is unavailable during a mishandled paper condition. The feature is
activated in Key Operator mode. See p.9-39 to p.9-43.
Non-Image Area Erase
When copying from the platen glass with the document cover open only, the image area is copied,
erasing the exposed area of the platen glass outside the document. This function can be set by key
operator mode, to be activated with any copying conditions, with APS or AMS selected, or not to be
activated. See p. 9-39 to 9-43.
RADF Frame Erasure Selection
When copying using the RADF, the four edges of the document will be erased by five millimeters
each. This function is set ON/OFF by key operator mode. See p. 9-39 to 9-43.
Odd-Even Original Counter
The odd-even original counter automatically counts originals in 1s2 mode and Insertion modes.
Odd status is adjusted automatically by insertion of an extra sheet. The odd-even original counter is
set by key operator mode, see p. 9-39 to 9-43.
Count of Sheet Insertion Originals
When this function is activated and Sheet Insertion mode is selected, the copier automatically counts
the number of RADF originals, so that the original count is detected by the copier in advance of
starting the job. This function is set ON/OFF by key operator mode. When this function is set OFF,
the original count should be entered manually. See p. 9-39 to 9-43.