User manual

3-10 Machine Information
Machine Information
Initial Settings
Initial settings represent the initial full-auto machine condition when power is turned on; when ECM
password is set; or when Auto Reset mode is restored, either manually or automatically.
Print Quantity : 1
Magnification Ratio : 100%
RADF : ON
Copy mode : 2230; 1-1, 2330; 1-2
AES: (Automatic Exposure Selection) : ON
APS: (Automatic Paper Selection) : ON
Sorter : OFF
Note: All settings can be set by the key operator except Print Quantity.
Auto Reset Mode
The Auto Reset function can be set for OFF/ 30 seconds/ 1 minute/ 1.5 minute/ 2 minutes/ 2.5
minutes/ 3 minutes. Initially, the mode is set to function after 1 minute of copier inactivity. The Auto
Reset key function also re-displays the Basic screen, unless the settings are changed by the key
operator in the Initial settings menu. For the key operator setting, see p. 9-39 to 9-43.
Auto Shut-Off Mode
This mode automatically shuts off the main power after a specified period of copier inactivity. The
Auto shut-off function can be set for 30 minutes/ 60 minutes/ 90 minutes/ 120 minutes/ 240 minutes.
Initially, the mode is set to function after 60 minutes of copier inactivity.
For the key operator setting, see p. 9-39 to 9-43.
Automatic Paper Selection (APS)
When APS is highlighted on the LCD screen, the appropriate copy paper size is automatically
selected. When copying from the platen glass or document feeder, APS detects the sizes indicated
below. For the key operator setting, see p. 9-39 to 9-43.
PLATEN GLASS: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R
ADF (1-1 OR 1-2 MODE): 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R
RADF (2-2 OR 2-1 MODE): 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R
Automatic Magnification Selection (AMS)
AMS functions automatically when Copy Size is pressed in the full-auto mode. An appropriate ratio
is selected, based on the relationship of copy size to original size.