User manual

Maintenance 10-5
Maintenance
Loading Paper (continued)
1 Withdraw the fixed tray.
2 While pressing the release knob, move the side guide plate forward.
3 Load paper with curl side up.
4 Load paper completely into the tray up to the hooks of the paper guides, but not above
them.
NOTE: Do not load paper other than the paper size indicated at the front of the tray; otherwise the machine may
malfunction.
5 While pressing the release knob, move the side guide plate against the paper.
6 Push the tray into the machine until it locks into place.
LCT (Large Capacity Tray) (Konica 2230, Tray 4; Konica 2330, Tray 3)
Load paper with edges curling upward
1 Withdraw the LCT.
2 Stack paper with curl side up.
The bottom of the tray will lower a bit due to the weight of stacked paper.
3 Push in the tray until it locks into place.