User manual

9-14 Key Operator Mode
Key Operator Mode
key code screen displays, if a code is required.
3 Use the keypad to enter your 8-digit ECM master key code, then press [OK].
If the ECM master key code is valid, the ECM setting menu screen will be displayed.
Key operator password entry
screen
Key operator mode screen
ECM master key code screen
ECM setting menu screen
4 Press [F1 (▼)] and [F2 (▲)] to select the desired ECM function. Follow instructions
displayed on the screen, and press [OK] to complete the setting. (See procedures starting
on the next page.)
5 To exit the ECM mode, press [F4 (PREV)] on ECM setting menu screen.
6 To exit the Key operator mode, turn the main power switch OFF.
ECM (Electronic Copy Monitor) Setting [3] (continued)
Password Setting [1]
Create up to 256 individual passwords, from 001~256. Use the following procedure to create new or