Recycled paper is used for the inside pages of this book. Konica 2230/2330 Copier User’s Manual As an ENERGY S TAR Partner, Konica Business Machines U.S.A., Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
1997 Konica Business Machines U.S.A., Inc. MAINTENANCE AGREEMENT The KONICA 2230/2330 copier will give you many years of trouble-free service. To ensure high quality copying performance and to prevent premature wear and failure of precision parts and components, periodic cleaning and routine adjustments should be scheduled.
Contents Section 1: Introduction To the User ................................................................................................................. 1-2 Overview of the User's Manual ............................................................................. 1-3 Copier Features .......................................................................................................... 1-4 Standard Equipment ...........................................................................................
Contents Automatic Tray Switching (ATS) ............................................................................ 3-11 Power Saver Mode ................................................................................................... 3-11 Key Operator Settings .............................................................................................. 3-12 Auto Low Power Timer ....................................................................................... 3-12 Non-Image Area Erase ...........
Contents Section 5: Basic Operations Basic Screen ............................................................................................................... 5-2 Copy Mode ............................................................................................................ 5-3 1-1, 1-2, 2-2, 2-1............................................................................................... 5-3 1s2 Mode Odd-Even Original Counter On ...................................................
Contents Section 7: Job Memory Job Store ..................................................................................................................... 7-2 Job Recall ................................................................................................................... 7-4 Job Memory Form ...................................................................................................... 7-5 Section 8: Applications Application Function Menu ............................................
Contents How to Access the Initial Setting Mode ............................................................... 9-6 Copy Mode [1]....................................................................................................... 9-7 Copy Density [2] ................................................................................................... 9-8 Lens Mode [3] ....................................................................................................... 9-9 APS/Paper Tray [4] .............
Contents Preventive Maintenance ......................................................................................... 10-11 Reading the PM Count ...................................................................................... 10-11 Reading the Total Count ................................................................................... 10-11 Cleaning the Document Glass and Cover .............................................................. 10-12 Cleaning the Platen Glass .......................
Section 1: Introduction To the User Overview of the User's Manual Copier Features Standard Equipment Optional Equipment
Introduction To the User Welcome to the Konica 2230/2330 copier product, which provides a high technology LCD screen for performing a full range of features in your working environment. General product information is given below. Key Operator Functions Custom settings can be made by the key operator (or anyone who is responsible for the machine). Access to the Key Operator mode may require a master password, if previously set by service.
Introduction To the User (continued) Overview of the User’s Manual To enjoy optimal performance, read this manual before using the copier. Be sure to handle the machine and perform all copying operations only as recommended in the manual. Keep the manual located with the machine so that all users may refer to it, as needed. Manual Organization: The User’s Manual is made up of twelve main copier sections, plus a glossary of copier terms. Section pages list topics covered in each section.
Introduction Copier Features 30 CPM 2 IN 1 FORMAT AUTO COPY AUTOMATIC DUPLEX AUTOMATIC EXPOSURE SELECTION (AES) AUTOMATIC MAGNIFICATION SELECTION (AMS) AUTOMATIC PAPER SELECTION (APS) AUTOMATIC TRAY SWITCHING (ATS) AUTO RESET BOOK COPY CHECK SCREEN ELECTRONIC COPY MONITOR (ECM) FRAME/FOLD ERASURE IMAGE SHIFT JOB MEMORY KEY OPERATOR MODE LCD SCREEN WITH INTERACTIVE FUNCTION KEYS MIXED ORIGINAL MOISTURE PAPER OHP INTERLEAVE BLANK SHEET INTERLEAVING COPY SHEET INTERLEAVING PHOTO MODE PHOTO-TEXT MODE POWER SAV
Section 2: Safety Information User Instructions Machine Safety Labels Regulations FCC Regulations Canadian Department of Communications Regulations Machine Installation and Power Requirements Machine Handling and Care Routine Safety Check
Safety Information User Instructions The following pages include important safety information, which should be read and understood before you attempt to operate the machine. If you have any concerns about safety matters, please contact your service representative. Keep this manual permanently located with the machine, and in good, legible condition. The manual should be readily available to all users. Machine safety labels are attached to some inside areas of the machine.
Safety Information Machine Safety Labels If you touch any machine area that you are advised by any caution label to avoid, you may be burned or injured. Do not remove caution labels. If any caution label is illegible due to soilage, clean the label. If cleaning does not render the label legible, please contact your Konica service representative.
Safety Information Regulations FCC Regulations Warning: The Konica 2230/2330 copier generates, uses, and can radiate radio frequency energy. If it is not installed and used in accordance with the instruction manual, interference with radio communications may result.
Safety Information Machine Installation and Power Requirements CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN BODILY INJURY AND/OR COPIER DAMAGE ❒ FIRE PREVENTION Install copier away from materials that can catch fire, such as curtains; flammable or volatile materials; and dampness. ❒ WATER DAMAGE Do not install or operate the copier outdoors near a lake, pond, or river, etc.; and do not allow the machine to come in contact with splashes of rain, water, or any liquid.
Safety Information Machine Installation and Power Requirements (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN COPIER DAMAGE, OVERHEATING, RISK OF ELECTRICAL SHOCK, AND/OR PERSONAL INJURY ❒ PLUG SOCKET A plug socket is limited in capacity. Use an exclusive power source for the copier; otherwise, an accident from overheating and/or smoking may occur. The total power consumption of the copier, including all possible options, must not exceed the capacity of the main power supply.
Safety Information Machine Handling and Care CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN COPIER DAMAGE, OVERHEATING, AND/OR PERSONAL INJURY ❒ MACHINE CONTACT Never touch internal high voltage, high temperature or magnetism areas indicated with a CAUTION HIGH TEMPERATURE label. Never touch the drum surface. Never touch the inside of the copier for any purpose other than for removing mishandled paper or adding toner.
Safety Information Machine Handling and Care (continued) CAUTION: FAILURE TO HEED THE FOLLOWING CAUTIONS MAY RESULT IN COPIER DAMAGE, OVERHEATING, AND/OR PERSONAL INJURY ❒ TOTAL BIN CAPACITY IN CASCADE MODE ST-217 In-Bin Stapler Sorter and ST-216 Off-Line Stapler Sorter feature the Cascade mode which can be activated by Service. Using the ST-217 In-Bin Stapler Sorter Do not set the copy count above 700; otherwise, paper misfeed may occur.
Safety Information Routine Safety Check CAUTION: ❒ FIRE PREVENTION Check for abnormal heat from power cord and/or plug. Do not use flammable liquids, thinners or alcohol near the machine; these materials may cause a fire. ❒ PERIODICAL CHECK Check for loose connection on power plug, damage to power cord and/or plug (creasing, fraying, etc.) Be sure the plug is inserted fully, and is not scratched or cut. If any abnormality occurs, do not continue to operate the machine.
Section3: MachineInformation Machine Layout Site Requirements Control Panel Layout LCD Screen BasicScreen Initial Settings Auto Reset Mode Auto Shut-Off Mode Automatic Paper Selection (APS) Automatic Magnification Selection (AMS) Automatic Exposure Selection (AES) AutomaticTray Switching (ATS) Power Saver Mode Key Operator Settings Auto Lower Power Timer Non-ImageAreaErase RADFFrameErasureSelection Odd-EvenOriginalCounter CountofSheetInsertionOriginals Weekly Timer Option LCDPanelContrast Service Settings
MachineInformation MachineLayout 3-2 MachineInformation
MachineInformation MachineLayout(continued) 1 2 3 4 5 6 7 8 9 RADF (ReversingAutomaticDocumentFeeder)automaticallyfeedsmultipleoriginalsoneat atimetotheplatenglassforcopying,thendischargesthem. POWER SWITCH turns power to the copier ON/OFF alternately, when pressed. LCD SCREEN displays interactive operation screens. CONTROL PANEL controls copier operations in conjunction with the Function keys under the LCD screen. MULTI-SHEET BYPASS holds 100 sheets (max.
MachineInformation MachineLayout(continued) 1 2 3 4 5 6 3-4 MANUAL STAPLE BUTTON manually staples copies in-bin or after being positioned in firstbin. TOP BIN receives non-sorted copies; and in the ST-217 In-Bin Stapler Sorter staples sheets thataremanuallyplacedhere. FIRST BIN is the first bin of the sorter. CARTRIDGE HOLDER accommodates new cartridge replacing an empty cartridge. PAPER JAM ACCESS DOOR opens to allow removal of jammed paper in the sorter. OFF-LINE STAPLER staples sheets manually.
MachineInformation MachineLayout(continued) 1 2 3 4 5 6 7 Toner unit Drum unit Knob 3 Lever 1 Knob 2 Fixing unit Total counter MachineInformation 3-5
MachineInformation SiteRequirements 3-6 MachineInformation
MachineInformation SiteRequirements(continued) MachineInformation 3-7
MachineInformation ControlPanelLayout 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 3-8 GROUP selects Group mode. STAPLE selects Staple-sort mode. SORT selects Sort mode. LCD SCREEN displays machine and copying status; and interactive screens for the four Functionkeys. FUNCTION KEYS interact with the LCD screen. [OK] completestheselectionmadebythefourFunctionkeys. AUTOCOPY automaticallyactivatescopyingeachtimetheDocumentFeederisclosed.
MachineInformation LCDScreen TheLCDdisplaysinteractivescreensformakingcopyjobselections.Selectionsmadebypressing thefourFunctionkeysarehighlighted.Thescreensalsoworkwiththeconventionalcontrolpanel keys. Afterthepowerswitchisturnedon,theBasicscreendisplays.Then,themessage“pleasewait Copieriswarmingup”displaysforapproximately1min.30sec.,untilthefixingtemperatureis reached. When the Basic screen is displayed, the four Function keys become interactive.
MachineInformation InitialSettings Initialsettingsrepresenttheinitialfull-automachineconditionwhenpoweristurnedon;whenECM passwordisset;orwhenAutoResetmodeisrestored,eithermanuallyorautomatically. PrintQuantity MagnificationRatio RADF Copymode AES:(AutomaticExposureSelection) APS:(AutomaticPaperSelection) Sorter :1 :100% : ON :2230;1-1,2330;1-2 : ON : ON :OFF Note: All settings can be set by the key operator except Print Quantity. AutoResetMode TheAutoResetfunctioncanbesetforOFF/30seconds/1minute/1.
MachineInformation AutomaticExposureSelection(AES) WhenAESishighlightedonthetouchscreen,theappropriateexposurelevelisautomatically selectedtomatchthecopydensityoftheoriginal.ManualdensityadjustmentsoverrideAES. AutomaticTraySwitching(ATS) Whentheselectedpapertraybecomesemptywhilecopyingisinprogress,automatictrayswitching detectsthesamecopypapersizeloadedinanothertraytoallowcopyingtobecontinuedwithout interruption.TheMulti-sheetbypasstrayisnotincludedintrayswitching.
MachineInformation KeyOperatorSettings The Key Operator can change settings and customize the copier so that it handles the needs of your particular working environment. See Section 9 to review the entire list of Key Operator functionsthatareavailabletoyou. AutoLowPowerTimer The Auto Low Power Timer enables you to maintain a lower fixing temperature during periods of copier inactivity. When Auto Low Power Timer is on, all other indicators will be off; and the initial modedisplaysadimmerback-litmessage.
MachineInformation KeyOperatorSettings(continued) WeeklyTimerOption The weekly timer allows the copier to be programmed to turn on and off according to the needs of eachworkenvironment.Forexample,turnmainbodypowerOff/Ondailyorweekly,duringlunch time,onholidays,andalsoenablethetimerinterruptmode,whichallowstemporaryuseofthe machineevenwhenthemachineisinthedaily,weekly,orholidayOffmode.Seep.9-27to9-38. LCDPanelContrast ThecontrolpanelcontrastfeaturecanbeadjustedintheKeyOperatormode.Seep.9-39to9-43.
MachineInformation ServiceSettings The following functions can be provided by your Konica Service Representative, who is authorizedtochangeDIPswitchsettings.Contactyourservicerepresentativeifsettingchanges are required. CascadeMode ST-217In-BinStaplerSorterandST-216Off-LineStaplerSorterfeaturetheCascademodecanbe activatedinusual.Refertop.6-5andfordetailsoftheCascademode.
Section4: PaperInformation Positioning Originals on the Platen Glass PositioninganOriginalforManualCopying Using the ReversingAutomatic Document Feeder (RADF) PositioningOriginals PositioningMixedOriginals Paper in Main Body/Drawer Base Unit Paper in Multi-Sheet Bypass Paper inAutomatic Duplex Tray Paper in Sorter PaperWeight Compatibility Chart
PaperInformation PositioningOriginalsonthePlatenGlass PositioninganOriginalforManualCopying Usetheplatenglasswhenoriginalsarenotsuitableforusewiththedocumentfeeder,e.g.,when size is incompatible, or when originals are folded, stapled, torn, or in generally poor condition. AutomaticPaperSelection(APS)operateswhencopyingfromtheplatenglass. Specifications ❒ Allcapacitiesarestatedfor20lbbondpaper ❒ Max.originalsize:11"x17"(280mmx432mm),sheetorbook ❒ Max.bookweight/thickness:15lb[6.8kg]/1.
PaperInformation UsingtheReversingAutomaticDocumentFeeder(RADF) Specifications ❒ Allcapacitiesarestatedfor20lbbondpaper ❒ Max.RADFtraycapacity:50sheets ❒ Max.originalexittraycapacity:50sheets ❒ Originalsizerange:11"x17",8.5"x14",8.5"x11",8.5"x11"R,5.5"x8.
PaperInformation UsingtheReversingAutomaticDocumentFeeder(RADF)(continued) PositioningOriginals Thedocumentfeeder(RADF)automaticallyfeedsupto50originalsdirectlytotheplatenglass, startingwiththetopsheet.TheRADFshouldonlybeusedforunstapled,unfolded,smooth,flat originals. ❒ Originalsizedetectionrequiresaccuratepaperguideadjustment ❒ APSdetectssize11"x17",8.5"x14",8.5"x11"and8.5"x11"R ❒ Sizeweight,capacityarespecifiedforallcopymodesonp.
PaperInformation UsingtheReversingAutomaticDocumentFeeder(RADF)(continued) PositioningMixedOriginals UsethemixedoriginalmodewiththeRADFtocopymixed-sizeoriginalsfromthedocument feeder. APS and AMS function in this mode. In APS mode copy paper will match original size, if available.Otherwise,anappropriateavailablesizewillbeselectedfor1:1mode. ❒ Mixedoriginalcombinations: Ledger11"x17"&Letter8.5"x11" Legal8.5"x14"&8.5"x11"R ❒ RADFcapacity: Max.50sheets ❒ Printquantity: Max.
PaperInformation PaperinMainBody/DrawerBaseUnit PaperWeight/Orientation:16~24lb/orientationsameasoriginal TotalPaperCapacity: 2230 Mainbody(withPlainStand);1,100sheets,including100-sheetMulti-SheetBypass MainbodywithDB-206A;1,600sheets,including100-sheetMulti-SheetBypass MainbodywithDB-206B;2,600sheets,including100-sheetMulti-SheetBypass MainbodywithDB-606;3,100sheets,including100-sheetMulti-SheetBypass Tray1:500sheets20lb/fixedto11"x17",8.5"x14",8.5"x11"/R,5.5"x8.
PaperInformation PaperinSorter ST-103Off-LineStaplerSorteracceptsLedger11"x17",Legal8.5"x14"andLetter/R8.5"x11"/R papersizes. ST-216Off-LineStaplerSorteracceptsLedger11"x17",Legal8.5"x14",Letter/R8.5"x11"/Rand 5.5"x8.5"papersizes. ST-217In-BinStaplerSorteracceptsLedger11"x17",Legal8.5"x14"andLetter/R8.5"x11"/R (5.5"x8.5"inNon-sort,SortorGroupmode) ST-103 Off-Line Stapler Sorter (capacities at 20lb, unless otherwise indicated) Sortmodemax.bincapacity:50Letter/Ledger/Legal/8.5"x11"R Groupmodemax.
Section5: BasicOperations Basic Screen Copy Mode 1-1,1-2,2-2,2-1 1s2ModeOdd-EvenOriginalCounterOn CopyDensity AutomaticExposureSelection(AES) ManualMode(Lighter,Normal,Darker) Lens Mode AutomaticMagnificationSelection(AMS) SpecialRatioTable SelectingaSpecialRatioforNon-StandardPaper PresetandUserSetRatios ZoomMode Copy Size Auto Copy Interrupt Mode Check Mode Entering a User Password
BasicOperations BasicScreen The Basic screen displays after warm-up, when the power is turned on; when Auto Power Saver modeisactivated;whenECMpasswordisset;orwhenAutoResetmodeismanuallyor automaticallyrestored.AllcopyingselectionscanbeinitiatedfromtheBasicscreen,whether selectedwithfourFunctionkeys,orconventionalkeys,i.e.,Application,Output,andJobMemory. WhentheElectronicCopyMonitor(ECM)isactivated,avalid5-digituserpassword,assignedby the Key Operator, must be entered before copying can be performed.
BasicOperations TheBasicScreen(continued) CopyMode 1-1, 1-2, 2-2, 2-1 The [F1 (RADF)] is used to display the Copy mode screen, from which all copy modes can be selected:1-1,1-2,2-1,2-2.
BasicOperations TheBasicScreen(continued) CopyMode(continued) Thefollowingillustrationsshowexamplesof1-2,2-1and2-2copymodes.
BasicOperations TheBasicScreen(continued) CopyMode(continued) Before selecting Copy Mode shown on the screen below, read specifications on the previous page, andseeSection4forinformationonpositioningoriginals. Basicscreen 1 2 3 4 5 Copy mode screen Position original(s) face down in the document feeder or on the platen glass. If 1-2 mode is required, count originals before placing in document feeder, as you will be promptedtoinputtheamountlater.
BasicOperations TheBasicScreen(continued) CopyMode(continued) 1s2 Mode Odd-Even Original Counter On Theodd-evenoriginalcounterisakeyoperatorsettingfunctionthatautomaticallycountsoriginals, andinsertsablankcopysheetiftheoriginalcountisodd. Basicscreen 1 2 3 4 5 6 7 8 5-6 Copy mode screen Position original(s) face down on the document feeder. Press [F1 (RADF)] to display the Copy mode screen. Press[F2]toselect1-2mode. Press[OK]tocompletethesettingandreturntotheBasicscreen.
BasicOperations TheBasicScreen(continued) CopyDensity Automatic Exposure Selection (AES) AESoperatesinthefull-automodebydetectingthedensityoftheoriginalimageandautomatically selecting the appropriate exposure for the copy. When manual density is selected, press [AUTO RESET] to reset to AES mode. Manual Mode (Lighter, Normal, Darker) Selectmanualcopydensitytoadjustexposure(density)whenoriginalsaretoolightortoodark. Manualadjustmentscanbemadein7levels.
BasicOperations TheBasicScreen(continued) LensMode Automatic Magnification Selection (AMS) AMSfunctionsinthefull-automodewhenCopySizeisselectedmanually. ❒ Incompatible:APS,ChangeMagnification,Reduce&Shift Anappropriatereductionorenlargementratiowillbeautomaticallyappliedtotheimageforthe selectedcopysize.AMSautomaticallycalculatesandselectsthecorrectratio. AMSratiosareshowninthetablebelow. PLEASE NOTE: 1 Tocopy5.5"x8.5"originalstosize5.5"x8.5",select5.5"x8.5"COPYSIZE,thenselect1.00magnification.
BasicOperations TheBasicScreen(continued) LensMode(continued) Special Ratio Table 1 Locateoriginalwidthonthehorizontalaxis.Locatecopywidthontheverticalaxis. 2 Locateoriginallengthonthehorizontalaxis.Locatecopylengthontheverticalaxis. 3 Entertheappropriateratio,usingPresetorZoommode.(Usesmallerratioforreduction,largerratioforenlargement,keeping withintheavailable0.50~2.00magnificationrange.
BasicOperations TheBasicScreen(continued) LensMode(continued) Selecting a Special Ratio for Non-Standard Paper Todeterminereductionorenlargementratioswhenusingnon-standardpapersizes,refertothe Special Ratio Table on the previous page, and follow the procedure below. 1 First,determinethecorrectratio,asfollows: Original-Copy Width Locatetheoriginalwidthonthehorizontalaxis. Then, locate the copy width on the vertical axis. Findtheratioonthetablewherethesetwovaluesmeet.
BasicOperations TheBasicScreen(continued) LensMode(continued) Preset and User Set Ratios UsethePresetandUserSetratiostoincreaseordecreasemagnificationinfixedamounts. Six Preset ratios are initially set as shown below, and are adjustable in the Key Operator mode, if necessary.Inaddition,threeUserSetratiosareadjustablebythekeyoperator.Allratiosremain effective until they are replaced.
BasicOperations TheBasicScreen(continued) LensMode(continued) Zoom Mode Use the Zoom mode to reduce or enlarge the copied original image in 1% increments. ❒ Zoomrange:50%~200% Basicscreen Magnificationselectionscreen Zoomscreen 1 2 3 4 5 Press[F3(1:1)]toentertheMagnificationselectionscreen. Press [F1 (ZOOM)] to enter the Zoom screen. Use the keypad to enter a 3-digit zoom ratio; or press [F3 (▼)] and [F4 (▲)] to scroll to the desired ratio. The zoom ratio will be displayed.
BasicOperations TheBasicScreen(continued) CopySize Copy Size is used to display the selection screen where you may reset the APS mode, or select a specific paper tray. When a specific tray is selected, the copy size may require a ratio adjustment. WhenusingtheRADFwithautomaticsettings,aratiowillbeselectedautomatically. Traylocationscorrespondtotrays1,2,3,4,5shownonp.3-2. ❒ Whenaselectedtrayisempty,anout-of-papericonwillflashonthePapertrayselectionscreen,alongwithamessagetoload paperintheemptytray.
BasicOperations UseAutoCopytoautomaticallystartthecopyingoperationassoonasthedocumentcoverisclosed down over the platen original. With this feature, there is no need to press [START PRINT] key. AutoCopyautomaticallyactivates20secondsafterthelastcopyingoperation. ❒ AutoCopyOff-timer:20seconds ❒ Incompatible:RADF,2-2,2-1,BookCopy,Sheet/CoverInsertion,2in1Format,MixedOriginal 1 2 Press [AUTO COPY]. Makeallsettings,andpress[OK]toreturntotheBasicscreen. 3 4 5 Usekeypadtoenterprintquantity.
BasicOperations Use the Interrupt mode to interrupt a copy job in progress to perform a simple job from the platen glass.WhenInterruptcopyingiscompleted,thesettingsfortheinitialjobrestoreautomaticallyand the Basic screen displays. The original copy job can be resumed by pressing [START PRINT] key. ❒ Compatible:Magnification1.
BasicOperations Use Check mode to confirm copying selections before pressing [START PRINT] key. ❒ AllsettingsmadecanbeviewedintheCheckmodescreen. 1 Press[CHECK]todisplaythecurrentsettings. 2 3 Verify the settings made for the current job. Press [OK] or [CHECK] to exit from the Check mode and return to the Basic screen. If settings are OK, press [START PRINT] to start copying. Otherwise, adjust settings, press [OK]; then press [START PRINT] when the Basic screen isdisplayed.
BasicOperations A user password is required only when the Electronic Copy Monitor (ECM) feature is activated; a UserPasswordisassigned;and“EnterE.C.M.password”isdisplayedonthescreen. 1 2 3 4 Enteryour5-digitpassword,usingthekeypad. If the password is invalid, the copier will reset to the initial mode. Inthatcase,enterthecorrectpassword;orcontactthekeyoperator. Press [START PRINT]. The current Copy Count will be displayed for a few seconds.
Section6: OutputModes Sorter Specifications Non-Sort Mode Cascade Mode Sort Mode Group Mode ST-217 In-Bin Stapler Sorter: Staple Sort Mode ST-217 In-Bin Stapler Sorter: Manual Staple Sort In-Bin ST-217 In-Bin Stapler Sorter: Manual Staple in the Top Bin ST-103/ST-216 Off-Line Stapler
OutputModes SorterSpecifications UseonlypaperthatisrecommendedbyKonicaandstoredundertheenvironmentalconditions statedforcopyquality.Specialstockisnotguaranteedforreliabilityorcopyquality.MultiSheetBypass,Interrupt,OHPInterleave,andMixedSizeOriginalw/Staplingareincompatiblewith sorteruse.
OutputModes SorterSpecifications(continued) NON-SORT MODE; Paper size 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, or 5.5"x8.
OutputModes SorterSpecifications(continued) STAPLING MODE: Paper size 11"x17", 8.5"x14", 8.5"x11", or 8.5"x11"R ❒ ST-103Off-LineStaplerSorter 25sheets20lb/corner13±3/5mm(serviceadjust.to5mm)/side10±5mmfromedge ❒ ST-216Off-LineStaplerSorter 25sheets20lb/corner13±3/5mm(serviceadjust.to5mm)/side10±5mmfromedge ❒ ST-217In-BinStaplerSorter 50sheets(letter,legal,8.5"x11"R)30sheets(ledger);16~24lb Corner7±2mmfromsideedge,8±2mmfromtopedge Max.
OutputModes Non-SortMode Use the Non-sort mode when making a large number of copies of a single original or when using special stock. Copies exit to the top bin of the sorter. ❒ Topbincapacity: ❒ ❒ ❒ ❒ 1 2 3 ST-103Off-LineStaplerSorter :max.100sheets ST-216Off-LineStaplerSorter :max.100sheets ST-217In-BinStaplerSorter :max.100sheets Topbinpaperweight:16~24lb;Specialstock(32lb,OHP,labels,holepunch,ragcontent) Max.originalsinNon-Sortmode:100sheets20lbbond Binpaper:11"x17",8.5"x14",8.5"x11",8.5"x11"R,5.5"x8.
OutputModes CascadeMode Use the Cascade mode to allow continuous delivery of non-sort copies from the top bin to subsequentbinsofthesorter.Selectthecascademodewhentheprintquantityamountexceedsthe 100-sheetcapacityofthetopbin. TheCascademodeallowsyoutoincreasetheoverallbincapacityupto670/700sheets,byusing thetopbinplussomeorallofthe19/20regularbins.Copiedsheetsexceedingthiscapacitywillbe deliveredtothe20thbin(thebottombin).(SeeCautionstatement.) NOTE: TheCascademodecanbeactivatedbyserviceduringsetup.
OutputModes SortMode Use the Sort mode to sort copies of the original set into bins, one set per bin. Up to 20 bins are availableinST-216/217.Upto10binsareavailableinST-103. ❒ Bins: ❒ ❒ ❒ ❒ ❒ ❒ ❒ ST-103Off-LineStaplerSorter:Topbin+9bins=10bins ST-216Off-LineStaplerSorter:Topbin+19bins=20bins ST-217In-BinStaplerSorter:20bins(TopbinisnotusedinSortmode) Bincapacity: ST-103/216Off-LineStaplerSorter:max.50sheets ST-217In-BinStaplerSorter:max.50sheets(letter,legal,8.
OutputModes GroupMode UsetheGroupmodetomakemultiplecopiesofeachoriginalsheet,andgroupthemineachbin. ❒ Bins: ❒ Bincapacity: ❒ Binpaperweight: ❒ Originals: ❒ Binpaper: ❒ Printquantity: ❒ Incompatible: 1 2 3 ST-103Off-LineStaplerSorter:Topbin+9bins=10bins ST-216Off-LineStaplerSorter:Topbin+19bins=20bins ST-217In-BinStaplerSorter:20bins(TopbinisnotusedinGroupmode) ST-103/216Off-LineStaplerSorter:max.30sheets20lb ST-217In-BinStaplerSorter:max.
OutputModes ST-217In-BinStaplerSorter:StapleSortMode UsetheIn-BinStaplerSorterinStapleSortmodetoautomaticallystaplethecopiedsetineachbin immediatelyaftertheyaresorted(collated).Eachbinholdsacopiedandcollatedsetoftheoriginals. ❒ ❒ ❒ ❒ ❒ ❒ Bins:21(only20binsareusedinStapleSortmode) Staplesheetcapacity:max.50sheets(letter,legal,8.5"x11"R);30sheets(ledger) Binpaperweight: 16lb~24lb Binpaper(copysize):11"x17",8.5"x14",8.5"x11",8.5"x11"R Originals:Max.50sheets20lb Stapleoccurs: 1-1(50originals;letter,legal,8.
OutputModes 1 Placeoriginals,asrequired. 2 3 Press [STAPLE] to light the STAPLE and SORT indicators. Enter desired print quantitiy, then press [START PRINT]. Press [AUTO RESET] to clear settings. NOTES: 1 Fordetailsonpaperweights,sizes,andcapacitieswhenusingtheStaplesortmode,pleaseseeSection4. 2 Copieswillbestapledwhenbinsarefullevenifcopyingisnotcompleted;amessagewillfirstpromptyoutoremovepaperfrom thebins,andthenyouwillbepromptedtopress[STARTPRINT]toresumecopying.
OutputModes UsetheManualStaplebuttontomanuallystapleinthebin(s).Thisfeatureisconvenientwhen staplingisdesiredaftercopyingisalreadyunderwayintheSortmode.TheManualStaplebuttonis located on the top surface of the sorter. ❒ ❒ ❒ ❒ ❒ ❒ ❒ Bins: 21(only20binsareusedinManualStapleSortmode) Staplesheetcapacity: Max.50sheets20lbletter,legal,8.5"x11"R;30sheetsledger Binpaperweight: 16~24lb Originals: Max.50sheets20lb~24lb Binpaper(copysize):11"x17",8.5"x14",8.5"x11",8.5"x11"R Printquantity: Max.
OutputModes ST-217In-BinStaplerSorter: ManualStapleintheTopBin UsetheManualStaplebuttontomanuallystapleacopiedsetplacedinthetopbinorthefirstbin. The Manual Staple button is located on the top of the sorter. The first bin is the sorter bin directly belowthetopbin. ❒ Topbinstaplingcapacity:Max.50sheets 1 2 3 Evenly align the edges of the sorted set. Position the sorted set face up into the top bin so that the corner to be stapled is in the front (forward)rightposition. TheManualStaplelightwillturngreen.
OutputModes ST-103/ST-216 Off-Line Stapler UsetheOff-LineStapleroptiontomanuallystapleacopiedset. Staplingcapacity:max.25sheets20lb NOTE:Whencopyingandusingthesorter,the markoftheOff-LineStaplerbecomesredandthestaplercannotbeused. Side Stapling 1 Removecopiedsetsfromthesorterbins,andneatly aligneachsetbeforestapling. 2 While holding the set, insert the sheets on the side to be stapled. The copied set will be stapled at the inserted location.
OutputModes ST-103/ST-216 Off-Line Stapler (continued) Corner 1 2 3 Stapling Pressthestaplerreleasebuttontoopenthestaplerunit. Removethecornerstaplingadaptordevicefromthelocationshown. Partiallyclosestaplerandinsertthestaplingadaptorintotheslotindicated. 4 5 Whenadaptorisinserted,closestapler. Insert upper left corner of paper into stapler. The copied set will be stapled. NOTE:Wheninsertingtheadaptordonotclosestaplercompletely.
Section7: JobMemory Job Store Job Recall Job Memory Form
JobMemory JobStore Use Job Store to store up to 12 frequently-used copying jobs, which can be recalled at any time. Thestoredjobscanbegivenalphabeticalnameswithamaximumof5characters. ❒ Allcopyingfunctionscanbeselected ❒ InterruptmodecannotbeusedwhileinJobMemory Job Memory Mode 7-2 Jobstore/recallscreen Jobno.
JobMemory JobStore(continued) 1 2 3 4 5 6 MakejobselectionsfromtheBasicscreenand/orApplicationselectionscreen. When all selections are made, press the [JOB MEMORY] key to display the Job store/ recallscreen. If you wish to cancel the settings made in the procedure below, press [AUTO RESET]. The Basic screen will be restored. Press [P] button on the Control panel. The Job no. selection screen will be displayed. Thefirstscreendisplaysframesnumberedfrom1~3tostorethejobnameunderthat number.
JobMemory JobRecall Use Job Recall to recall jobs that are already stored in Job Memory. ❒ InterruptmodecannotbeusedwhileinJobMemory Job Memory Mode Check Mode 1 2 3 4 Jobstore/recallscreen Checkscreen Place original(s) in RADF as required for the job you are about to recall. Press the [JOB MEMORY] key to display the Job store/recall screen. Eachscreendisplaysthreejobsatatime,startingwithframesnumberedfrom1~3.(Usethe [F4] to scroll through each of four screens to reach all 12 job numbers.
JobMemory JobMemoryForm JobMemory 7-5
Section 8: Applications Application Function Menu Sheet/Cover Insertion OHP Interleave Book Copy Image Shift Simplex Mode (1-1, 2-1) Duplex Mode (1-2, 2-2) Reduce & Shift Frame/Fold Erasure Thin/Thick Paper Mixed Original Mode 2 in 1 Format Photo Mode Photo Mode Photo-Text Mode Moisture Paper
Applications Application Function Menu When the [APPLICATION] key is pressed, the Application selection screen displays on the LCD screen. If one function on the menu is incompatible with another, it will appear dimmed. When a function is selected, it becomes highlighted. If you press the [OK] key when a function is highlighted, another screen or two will display to enable you to enter the appropriate settings.
Applications Sheet/Cover Insertion Use Sheet/Cover Insertion in copy mode or blank mode to insert Chapter sheets or slip sheets into the finished set. Sheet insertions from the Universal tray (Konica 2230, tray 2; Konica 2330, tray 1) may be used in conjunction with Front or Front & Back cover insertions from the Multi-sheet bypass tray. All other trays may be used for regular copied sheets. Specifications for Sheet/Cover Insertion ❒ Max.
Applications Sheet/Cover Insertion (continued) When using the Front Cover Mode and/or Back Cover Mode, the sheets are usually fed from the bypass tray; however, the Universal tray can also be used. The Multi-sheet bypass tray is required when the Hard cover mode is selected. Insertion ModeThis mode is classified as two types, namely; Blank insertion and Copy insertion.
Applications Sheet/Cover Insertion (continued) Applications 8-5
Applications Sheet/Cover Insertion (continued) Sheet Covers Selection Application selection screen Cover/Sheet selection screen Page selection screen Original quantity screen Max. insertion locations: 15 Max. originals: 50 sheets 1 2 3 First, load insert sheets in the Universal tray (Konica 2230, Tray 2; Konica 2330, Tray 1), and load regular sheets in any compatible tray. If covers are required, load 20 lb cover sheets in the Multi-sheet bypass tray.
Applications Sheet/Cover Insertion (continued) 4 5 6 7 8 9 10 11 Press [APPLICATION] on the control panel to display the Application selection screen. Press [F1] to align the arrow to the “Sht./Cover Insertion” indicator, then press [OK]. The Cover/Sheet selection screen will be displayed. Select Front Cover Insertion. (1) Press [F1 (Front)] to select “Front copy” or “Front blank”. To deselect Front Cover Insertion, display “Front”.
Applications OHP Interleave Use the OHP Interleaving function in 1-1 or 2-1 mode to copy onto overhead projection transparencies, and output a blank or copied interleaf sheet with each copied transparency. In Blank Sheet Interleaving, a blank interleaf sheet may be output with each transparency to keep the film material from sticking together.
Applications OHP Interleave (continued) 1 2 3 4 5 6 Position original, then load OHP transparencies in the Multi-sheet bypass, and interleaving paper in any other tray, 1~5. Press [APPLICATION] to display the Application selection screen. Press [F1] to align the arrow to the “OHP interleave” indicator, and press [OK]. The OHP interleave mode selection screen will be displayed. Press [F2 (Blank)] or [F3 (Copy)]. Press [OK]. Make additional application selections, or press [OK] to return to the Basic screen.
Applications Book Copy Use Book Copy mode from the Platen glass to copy an original, such as an opened book; a ledger size sheet; or two 8.5"x11" sheets placed size by side. In 1-1 mode, the left and right facing pages of the original will be copied separately onto two 8.5"x11" sheets. In 1-2 mode, the left and right facing pages of the original will be copied separately and duplexed onto one 8.5"x11" sheet. If a copy size other than 8.5"x11" is selected, Book Copy will function incorrectly.
Applications Image Shift Simplex Mode (1-1, 2-1) In 1-1 and 2-1 mode, create a left binding margin by positioning originals with page heading at top. (See example below.) A right margin will be created if originals are positioned with page heading at bottom. If image loss is likely, select Reduce & Shift from the Application selection screen, instead of Image Shift. ❒ ❒ ❒ ❒ Shift amount: 5 mm, 10 mm, 15 mm, 20 mm Only left binding margin is available Original/copy size: 11"x17", 8.5"x14", 8.5"x11", 8.
Applications Image Shift (continued) Simplex Mode (1-1, 2-1) (continued) 1 2 3 4 5 6 7 8 9 Place original(s) face down in the document feeder or on the platen glass. Select 1-1 or 2-1 copy mode from the Basic screen, as required. Press [APPLICATION] to enter the Application selection screen. Press [F2] to align the arrow to the “Image Shift” indicator, and press [OK]. The Image shift screen will be displayed. If selecting 1-1 copy mode in step 2, the “Front” indicator is highlighted.
Applications Image Shift (continued) Duplex Mode (1-2, 2-2) In 1-2 mode, use Image Shift to create a binding margin on side two only. In 2-2 mode, a left binding margin is created on side one and a right margin is created on side two. If image loss is likely, select Reduce & Shift from the Application selection screen, instead of Image Shift. ❒ ❒ ❒ ❒ Shift amount: 5 mm, 10 mm, 15 mm, 20 mm Only left binding margin is available Original/copy size: 11"x17", 8.5"x14", 8.5"x11", 8.
Applications Image Shift (continued) Duplex Mode (1-2, 2-2) (continued) 1 2 3 4 5 6 7 8 9 Place original(s) face down in the document feeder or on the platen glass. Select 1-2 or 2-2 copy mode from the Basic screen, as required. Press [APPLICATION] to enter the Application selection screen. Press [F2] to align the arrow to the “Image Shift” indicator, and press [OK]. The Image shift screen will be displayed.
Applications Reduce & Shift Use Reduce & Shift to create a margin without causing image loss. ❒ Shift amount: 10mm ❒ Reduction amount: 97%; 11"x17", 8.5"x14" 96%; 8.5"x11"R 95%; 8.5"x11", 5.5"x8.5" ❒ Original size/copy size: 11"x17", 8.5"x14", 8.
Applications Reduce & Shift (continued) 1 2 3 4 5 Place originals face down in the document feeder or on the platen glass. Press [APPLICATION] to enter the Application selection screen. Press [F2] to align the arrow to the “Reduce & Shift” indicator, and press [OK]. The “Reduce & Shift” indicator will be highlighted. Select additional application functions, or press [OK] to return to the Basic screen. Enter the desired print quantity.
Applications Frame/Fold Erasure Use Frame/Fold Erasure to eliminate black copy marks along borders. ❒ ❒ ❒ ❒ ❒ ❒ Frame erasure amount: 5mm, 10mm, 15mm Initial frame erasure value: 10mm Fold erasure amount: 10mm, 20mm 30mm Initial fold erasure value: 10mm Original/copy paper size: 11"x17", 8.5"x14", 8.
Applications Frame/Fold Erasure (continued) 1 2 3 4 5 6 Place original(s) face down in the document feeder or on the platen glass. Select desired Copy Size. Press [APPLICATION] to enter the Application selection screen. Press [F2] to align the arrow to the “Frame/Fold Erasure” indicator, and press [OK]. The Frame/Fold erasure screen will be displayed with Fold Erasure already highlighted as the default. To switch between Fold Erasure and Frame Erasure, simply press [F1] for Frame and [F2] for Fold.
Applications Thin/Thick Paper NOTICE: To avoid paper mishandling, Thin/Thick paper must be selected from the Application selection screen, as described below; not from the Paper tray selection screen. ❒ ❒ ❒ ❒ ❒ Copy size: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.5"x8.
Applications Use this mode to copy a set of mixed size originals from the document feeder. Automatic paper selection allows each original to be copied to a copy paper size to match the original, provided the mixed originals are comprised of either Ledger & Letter or Legal & Letter/R. The mixed original mode operates only in the RADF mode. ❒ Mixed original size: 11"x17" with 8.5"x11", or 8.5"x14" with 8.5"x11"R mixed (20 to 24 lb) ❒ Original feeding edge: 11"x17" (short edge) with 8.5"x11" (short edge) 8.
Applications The 2 in 1 mode copies two originals (pages or sides) onto one side of ledger or 8.5" x11"R paper. ❒ Originals : one-sided or two-sided letter sheets (8.
Applications Photo Mode Use the Photo mode to reproduce a half-tone photo image. The copy will closely represent the halftones of the original image. Photo-Text Mode Use the Photo-Text mode when the original image includes both half-tones and text. In this mode, text is improved in comparison to using the Photo mode only; and half-tones are improved in comparison to using no Photo mode, but may not be as closely represented as with Photo mode only. ❒ Copy paper: 11"x17", 8.5"x14", 8.5"x11", 8.5"x11"R, 5.
Applications Moisture Paper The Moisture Paper feature enables you to control copy quality when the copy paper has been stored in high humidity. The icon for Moisture Paper will be displayed on the Application Selection screen shown below, only if the feature is turned ON in the Key Operator setting mode. NOTE: Do not use the Moisture paper mode for low humidity paper. ❒ Incompatible: OHP Interleave Application selection screen 1 2 3 Press [APPLICATION] to enter the Application selection screen.
Section 9: Key Operator Mode To the Key Operator How to Access the Key Operator Mode Function Menu Map Initial Setting Mode [1] How to Access the Initial Setting Mode Copy Mode [1] Copy Density [2] Lens Mode [3] APS/Paper Tray [4] OutputMode[5] Preset/User Set Ratio(s) [2] ECM (Electronic Copy Monitor) Setting [3] ECMSettingMenu PasswordSetting[1] Count/LimitSetting[2] Reset E.C.M.
Key Operator Mode TotheKeyOperator The key operator is trained to handle all special key operator functions that are not accessible to thegeneraluser,suchasmonitoringoverallcopieractivity,machineperformance,andservice information;modifyingmachinesettings;andcontrollinguseractivity,forbillingpurposes. Aunique4-digitkeyoperatorpasswordisnormallysetbyserviceatinstallation.
Key Operator Mode FunctionMenuMap FUNCTION MENU SUB FUNCTION MENU AND SETTING OPTIONS [1] Initialsetting [1] [2] [3] [4] [5] Copymode:[RADF;1-1;1-2;2-2;2-1] Copydensity:[AES;manual] Lensmode:[AMS;ratio0.50~2.
Key Operator Mode FunctionMenuMap(continued) FUNCTION MENU [8] Memoryswitch setting 9-4 Key Operator Mode SUB FUNCTION MENU AND SETTING OPTIONS [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] [24] [25] AutoResetTimer Auto Low Power Timer AutoShutOffTimer AUTO/RESETKeyFunction RADF-OriginalEffect Non Image Area Erase RADFFrameErasureSelection CountOriginalsin1-2mode OriginalCountsinSheetInsertmode AutomaticTraySwitching PlatenAPS RADF APS ATS/APSS
Key Operator Mode Initial Setting Mode [1] Initialsettingsarethesettingsthatdisplayautomaticallywhenthecopierispoweredon,whenAuto Reset timer is operated, or when [AUTO RESET] key is pressed. These settings can be changed bythekeyoperator,asshowninthissection. Initially,i.e.
Key Operator Mode InitialSettingMode[1](continued) HowtoAccesstheInitialSettingMode Key operator mode screen 1 2 3 4 5 6 9-6 Initialsettingmenuscreen From power off condition: Turn the copier power switch ON, while pressing [OK]. If a 4-digit key operator password is set by service, the Key operator password entry screenisdisplayed. Use the keypad to enter your 4-digit key operator password, then press [OK]. The Key operator mode screen will be displayed.
Key Operator Mode InitialSettingMode[1](continued) CopyMode[1] Set copy mode to occur after power on or after auto/reset occurs. ❒ Settingoptions:RADF;1-1;1-2,2-2;2-1 Initialsettingmenuscreen 1 2 3 4 5 6 7 8 9 10 11 Copymodeinitialsettingscreen While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “ 1: Initial Setting”, and press [OK]. The Initial setting menuscreenwillbedisplayed.
Key Operator Mode CopyDensity[2] Set copy density to be effective after power on or after auto/reset occurs. ❒ Settingoptions:AES;manual 1 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Initialsettingmenuscreen 2 3 4 5 6 7 8 9 10 Press [F1 (▼)] and [F2 (▲)] to display “ 1: Initial Setting”, and press [OK]. The Initial setting menuscreenwillbedisplayed. Press [F1 (▼)] and [F2 (▲)] to display “ 2: Copy density”, and press [OK].
Key Operator Mode LensMode[3] Setthelensmoderatioyouinitiallywanttodisplayaftertheuserturnsthepoweronorafterauto resetrestorestheinitialsettings. NOTICE: This setting will be ignored if APS is selected for the initial Paper Tray setting, and an AMS ratio is required for a manuallyselectedPaperSize. ❒ Settingoptions:AMS;ratio50%~200% 1 2 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “ 1: Initial Setting”, and press [OK].
Key Operator Mode Set paper tray priority to be in effect after power is turned on or after Auto Reset occurs. This function sets tray priority, not paper size priority. Therefore, if paper size is changed in the tray, thetraywillstillremaintheprioritytray. If APS is selected for the initial Paper Tray setting, that setting takes priority over an initial setting for Lens Mode, as shown on previous page. This allows a required AMS ratio to be selected when CopySizeismanuallyselected.
Key Operator Mode Set initial output mode to be effective after power is turned on or after Auto Reset occurs. ❒ Settingoptions:Non-sort;Sort;Staple;Group 1 2 3 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “ 1: Initial Setting”, and press [OK]. The Initial setting menuscreenwillbedisplayed. Press [F1 (▼)] and [F2 (▲)] to display “ 5: Output mode”, and press [OK].The Output mode initial setting screen will be displayed.
Key Operator Mode ❒ Settingoptions:UserSetorPresetratio 1 2 3 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “ 2: Preset/user set ratio(s)”, and press [OK]. The Preset/usersetratio(s)settingscreenwillbedisplayed. Press [F2 (USER SET)] to select USER SET 1, 2 or 3. Enteraratiofrom50%~200%,usingthekeypad. If a ratio under 50 is entered, 50% will be displayed.
Key Operator Mode Thisfeaturecantrackcopierusageforindividualusersand/oraccountsaswellaslimitaccesstothe copiertoauthorizedusers.Copyquantitylimitsforspecificaccountscanalsobeset.UsetheECM KeyOperatorFormprovidedattheendofthissectiontorecorduserpasswordinformation. TheECMstoresupto256passwords,eachofwhichrepresentsaseparateaccountthatcanbeused for billing and record keeping.
Key Operator Mode 3 4 5 6 key code screen displays, if a code is required. Use the keypad to enter your 8-digit ECM master key code, then press [OK]. If the ECM master key code is valid, the ECM setting menu screen will be displayed. Keyoperatorpasswordentry screen Key operator mode screen ECM master key code screen ECMsettingmenuscreen Press [F1 (▼)] and [F2 (▲)] to select the desired ECM function. Follow instructions displayedonthescreen,andpress[OK]tocompletethesetting.
Key Operator Mode changeexistingpasswords. ❒ UserPasswordNo.:PasswordNo.from001~256,designatedbykeyoperator. ❒ UserPassword:Unique5-digitnumericcodeprogrammedbykeyoperatorforuser. ❒ SEARCHPASSWORD:Apasswordscrollingkeyusedtocheckpasswordstatusquickly. 1 2 3 4 5 6 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “ 3: E.C.M. setting”, and press [OK]. The ECM master key code screen displays, if a code is required.
Key Operator Mode Whenthesamepasswordhasnotbeenusedforanotheraccountnumber,“Passwordnot used”willbedisplayed. Ifsearchingisnotnecessary,simplyproceedtostep9. Whenthesamepasswordhasbeenusedforanotheraccountnumber,“Passwordused/ inputnewNo.”willbedisplayed. Entera5-digitpasswordagain,press[OK],andpress[F1(search)]. Note:Itispossibletoassignthesamepasswordtodifferentaccountnumbers.Note,however,thatthenumberofcopies willbecountedonlyforthepasswordwiththesmallestaccountnumber.
Key Operator Mode 2 3 4 Press [F1 (▼)] and [F2 (▲)] to display “ 3: E.C.M. setting”, and press [OK]. The ECM master key code screen displays, if a code is required. Use the keypad to enter your 8-digit ECM master key code, then press [OK]. If the ECM master key code is valid, the ECM setting menu screen will be displayed. Press [F1 (▼)]and[F2(▲)]todisplay “2:Count/Limitsetting”andpress[OK].
Key Operator Mode ❒ Settingoptions:ResetIndividualCountersorResetAllCounters ECM (Electronic Copy Monitor) Setting [3] (continued) ResetE.C.M.[3](continued) 1 While pressing [OK], turn power ON. Enter the key operator password, then press [OK].
Key Operator Mode 2 3 4 Press [F1 (▼)] and [F2 (▲)] to display “ 3: E.C.M. setting”, and press [OK]. The ECM master key code screen displays, if a code is required. Use the keypad to enter your 8-digit ECM master key code, then press [OK]. If the ECM master key code is valid, the ECM setting menu screen will be displayed. Press [F1 (▼)] and [F2 (▲)] to display “3: Reset E.C.M.” and press [OK].The Reset ECM countscreenwillbedisplayed.
Key Operator Mode 2 3 4 Press [F1 (▼)] and [F2 (▲)] to display “ 3: E.C.M. setting”, and press [OK]. The ECM master key code screen displays, if a code is required. Use the keypad to enter your 8-digit ECM master key code, then press [OK]. If the ECM master key code is valid, the ECM setting menu screen will be displayed. Press [F1 (▼)] and [F2 (▲)] to display“4: E.C.M. ON/OFF setting” and press [OK]. The ECMsettingmenuscreen 5 6 7 8 9 10 11 ECMON/OFFsettingscreen ECMON/OFFsettingscreenwillbedisplayed.
Key Operator Mode reached. 1 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. 2 Press [F1 (▼)] and [F2 (▲)] to display “ 3: E.C.M. setting”, and press [OK]. The ECM master key code screen displays, if a code is required. 3 Use the keypad to enter your 8-digit ECM master key code, then press [OK]. If the ECM master key code is valid, the ECM setting menu screen will be displayed. 4 Press [F1 (▼)] and [F2 (▲)] to display “5: Set Copy Limit-Mach. disable” and press [OK].
Key Operator Mode ❒ ❒ ❒ ❒ Settingoptions:LockJobmemory;DeleteJobmemory Lock/deleteisavailableforall12storedjobs Joblockisavailableonlyfornamedjobs Ablankkeyindicatesthatnojobisprogrammed JobMemorySetting[4](continued) 1 2 3 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “4: Job memory setting”, and press [OK]. The Job memorymenuscreenwillbedisplayed.
Key Operator Mode 4 5 6 7 8 9 10 11 [OK].TheJobmemorylockscreenwillbedisplayed. Press [F4] to scroll to the desired job number, press [F1]~[F3] to select the job number. The lock icon is displayed. The displayed lock icon is deleted. To delete a job memory, press [F1 (▼)] and [F2 (▲)] to display “2: Delete job memory” and press [OK].Delete job memory screen will be displayed. Press [F4] to scroll to the desired job number, press [F1]~[F3] to select the job number.
Key Operator Mode 1 2 3 4 5 6 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “5: Screen contrast adjustment”, and press [OK]. The Contrastadjustmentscreenwillbedisplayed. Press [F2 (▼)] or[F3 (▲)], as desired. Press [OK] to complete the selection. If no further changes are required, proceed to step 7. Press [F4 (PREV)]to returntothe Key operator mode screen. Key operator mode screen 7 8 Contrastadjustmentscreen TurnpowerOFF.
Key Operator Mode ❒ Settingoptions: Openingscreen(OFF,5seconds,10seconds,15seconds) Pressfunctionkey(OFF,0.5seconds,1.0seconds,1.5seconds) OK Key Timer Setting [6] (continued) 1 2 3 While pressing [OK], turn power ON. Enter the key operator password, then press [OK]. Press [F1 (▼)] and [F2 (▲)] to display “6: OK key timer setting”, and press [OK]. The OK TimerSettingscreenwillbedisplayed. Press [F1 (▼)] and [F2 (▲)] to display “1: Opening screen” or “2: Press function key”, and press [OK].
Key Operator Mode 4 Set the period of time. To display the Screen timer setting screen, press [OK] when “1: Opening screen” is displayed. Press [F1 (▼)] and [F2 (▲)] to display “1: OFF”, “2: 5 seconds”, “3: 10 seconds”, or “4: 15 seconds”,thenpress[OK]. 5 6 7 8 To display the Function key timer setting screen, press [OK] when “2: Press function key” isdisplayed. Press [F1 (▼)]and[F2(▲)]todisplay“1:OFF”,“2:0.5seconds”,“3:1.0seconds”,or“4:1.5 seconds”,thenpress[OK].
Section10: Maintenance Loading Paper Adding Toner Inserting a New Staple Cartridge ST-217In-BinStapler Off-LineStapler Preventive Maintenance ReadingthePMCount ReadingtheTotalCount Cleaning the Document Glass and Cover CleaningthePlatenGlass Cleaning the Inner Surface of the Document Cover Cleaning with the Wire Cleaning Knob
Maintenance LoadingPaper WhenanemptytrayisselectedautomaticallybyAPS,ormanuallyfromtheTrayselectionscreen, themessage“Pleaseloadpaperintray#”displaysinthemessageareaoftheBasicscreen. Add paper indicator ( ) Pressing [F4] key on the Basic screen displays the Tray selection screen. When the paper tray is empty, the Add paper indicator appears on the left side of the empty tray. Load the copy paper into thetrayindicated.
Maintenance LoadingPaper(continued) Fanning paper Before loading paper, fan it to prevent sheets from double-feeding. NOTE:Forbestresults,storepaperonaflatsurfaceinacooldryarea.Donotopenpaperpackagesuntilpaperisneededandkeep partiallyusedpackagestightlywrappedduringstorage. Copy paper capacity Be sure not to stack above the red line of the label as shown below.
Maintenance LoadingPaper(continued) Universal Tray (Konica 2230, Tray 2; Konica 2330, Tray 1) Load paper with edges curling upward 1 2 Withdrawtheuniversaltrayfromthemainbody. Remove the rear guide plate, and insert it into the position of your desired paper size. NOTE:Besuretoalignandsettherearguideplatetothepaper;otherwise,themachinemaymalfunction. 3 4 5 Stackpaperwithcurlsideup. While pressing the release knob, move the side guide plate against the paper. Pushintheuniversaltrayuntilitlocksintoplace.
Maintenance LoadingPaper(continued) 1 2 3 4 Withdrawthefixedtray. While pressing the release knob, move the side guide plate forward. Loadpaperwithcurlsideup. Load paper completely into the tray up to the hooks of the paper guides, but not above them. NOTE:Donotloadpaperotherthanthepapersizeindicatedatthefrontofthetray;otherwisethemachinemay malfunction. 5 6 While pressing the release knob, move the side guide plate against the paper. Pushthetrayintothemachineuntilitlocksintoplace.
Maintenance AddingToner Whentonersupplyislow,themessage“Pleaseaddtoner”displaysinthemessageareaoftheBasic screen. Add toner, as shown in the following procedure. ❒ Beforeaddingtoner,readdirectionsonthetonercartridgelabel.
Maintenance AddingToner(continued) 1 2 3 4 5 6 7 8 9 10 Tapbothtopandbottomofthenewtonercartridgeonsolidsurfaceabout15times,without removing the flexible outer cap. Vigorouslyshakethenewtonercartridge. Remove the flexible outer cap. Openthecopierfrontdoor,andpulltonerunitout90°totheright. Invert cartridge over the unit with the HDPE lettering toward you, inserting it at the rear, thenatfront,untilthecartridgeisfullyseatedovertheunit.
Maintenance InsertingaNewStapleCartridge ST-217In-BinStapler Whenstaplesareemptyinsorter,theReplacestaplecartridgemessagedisplaysontheLCD screen. Removing the Empty Cartridge and Inserting a New Staple Cartridge 1 2 3 4 5 10-8 Pull the release lever upward, and move the ST-217 In-Bin Stapler Sorter to the left. Gentlypulltheemptycartridgeupward,andwithdrawit. Remove the stopper from the new cartridge while holding the cartridge with the tip (claw portion) upward.
Maintenance InsertingaNewStapleCartridge(continued) ST-217In-BinStapler(continued) Testing the New Staple Cartridge 1 2 Place a few sheets on the top bin. Themanualstapleindicatorwilllight. PresstheManualstaplebuttonontheSorter. Staplingwillbeperformed. NOTE:Thestaplecartridgeholds5,000Staples.
Maintenance InsertingaNewStapleCartridge(continued) Off-LineStapler Removing the Empty Cartridge and Inserting a New Cartridge New cartridge 1 2 3 4 5 6 7 Pressthestaplerreleasebutton,andopenthestaplerunit. Press the cartridge holder in the direction of the arrow. Removetheemptycartridge. Checkthenewstaplecartidgeandremoveanyprotrudingstaples. Insertthenewcartidge. Press cartridge holder to lock cartridge in position. Closethestaplerunit.
Maintenance PreventiveMaintenance PreventiveMaintenance(PM)serviceisrecommendedformaintainingoptimalcopier performance.Whenpreventivemaintenanceisdue,themessage“CallforPM”willbedisplayedin themessageareaoftheBasicscreen.Atthattime,contactyourKonicaservicerepresentativefor service. You can read the PM count and estimate when the next PM is due. The first number in the PM displayrepresentsthedateofthelastPMandthecountofcopiesmadesincethePM,whichis showninthefirstline.
Maintenance CleaningtheDocumentGlassandCover Cleantheplatenglassandinnersurfaceofthedocumentcoverdaily,topreventsoilmarksfrom beingcopied.ConsultyourKonicarepresentativeaboutusingananti-staticsprayontheinner surfaceofthedocumentcover,topreventstaticchargefromgenerating. CAUTION Never use paint solvents, such as benzene or thinners, to clean any portion of the copier. To avoid copier damage, do not pour or spray water or cleaner directly on the platen glass. Do not useanyabrasivecleanerstocleantheglass.
Section11: Troubleshooting Call for Service Clearing Mishandled Paper Clearing a Wedged Staple from the Off-Line Stapler Unit CopyingTips
Troubleshooting Call for Service ACallforServicemessageindicatesamachineconditionthatrequirestheattentionofyourKonica service representative. 1 2 3 4 Immediately make note of the report code indicated in the upper portion of the screen. TurnOFFthemainpowerswitch. Unplugthemachine. ContactyourKonicaservicerepresentativeandreporttheconditionandreportcode.
Troubleshooting ClearingMishandledPaper Whenapapermisfeedoccurs,thecopierstopsmakingcopies;mishandledpapercodesdisplayon thescreentoindicatemisfeedarea(s);andaflashingcodeindicatestheareathatshouldbecleared first. Be sure to remove paper from each flashing location until all locations are cleared. See procedures on the following pages. Thefollowingmishandledpapercodesdisplayfor13specificareasofthemachine(seecallouts).
Troubleshooting ClearingMishandledPaper(continued) CAUTION: Whenremovingmishandledpaper,besuretoleavenotornpaperinsidethemachine,avoid touchingthedrumorscratchingitinanyway,andkeepallmetalandmagneticobjects,e.g., watches,jewelry,etc.awayfromthedrumarea. CAUTION: The fixing unit is internally very hot. To avoid getting burned DO NOT TOUCH the area. Use carewhenwithdrawingthefixingunit. CAUTION: The paper exit unit of the main body (outlet of fixing unit) is very hot.
Troubleshooting ClearingMishandledPaper(continued) Codez(Konica2230) Plainstand DB-206A DB-206B DB-606 Plainstand DB-206A DB-206B DB-606 Codez(Konica2330) Troubleshooting 11-5
Troubleshooting ClearingMishandledPaper(continued) Codex Plainstand DB-206A DB-206B DB-206A DB-206B DB-606 Codec 11-6 Troubleshooting DB-606
Troubleshooting ClearingMishandledPaper(continued) Codev DB-206B DB-606 Codeb DB-206B Troubleshooting 11-7
Troubleshooting ClearingMishandledPaper(continued) Coden Plainstand DB-206A DB-206B DB-606 Plainstand DB-206A DB-206B DB-606 Codem 11-8 Troubleshooting
Troubleshooting ClearingMishandledPaper(continued) Code, Plainstand DB-206A DB-206B DB-606 Plainstand DB-206A DB-206B DB-606 Code.
Troubleshooting ClearingMishandledPaper(continued) Code¦0 Plainstand DB-206A DB-206B DB-606 Plainstand DB-206A DB-206B DB-606 Code¦1 11-10 Troubleshooting
Troubleshooting ClearingMishandledPaper(continued) Code¦2 Plainstand DB-206A DB-206B DB-606 DB-206B DB-606 Code¦3 Plainstand DB-206A Troubleshooting 11-11
Troubleshooting ClearingMishandledPaper(continued) Code¦4 Plainstand 11-12 Troubleshooting DB-206A DB-206B DB-606
Troubleshooting ClearingaWedgedStaplefromtheOff-LineStaplerUnit 1 2 3 4 5 6 7 8 9 10 11 12 Pressthestaplerreleasebuttonandopenthestaplerunit. Press the cartridge holder in the direction of the arrow, as shown. Removethecartridge. Presscartridgeholderbacktocenterposition,then,pressitdownwarduntilitstops. Whilecartridgeisremoved,closethestaplerunit. To discharge a wedged staple, insert 2 or 3 sheets of paper as if for side stapling, as shown. Ifstapledischarges,gotostep12.
Troubleshooting CopyingTips COPIER DOES NOT OPERATE WHEN POWER SWITCH IS ON Fullyinsertpapertrays. Close RADF. Check to be sure power plug is firmly inserted in electrical socket. COPY IMAGE IS TOO LIGHT Manuallyadjustcopydensitytodarkerdensity. Check the message area of the Basic screen and add toner, if required. Check paper for dampness. Do not leave paper in copier when humidity is high. Or, Use the Moisuterpapermode. COPY IMAGE IS TOO DARK Manuallyadjustcopydensitytolighterdensity.
Troubleshooting CopyingTips(continued) COPYING DOES NOT BEGIN AFTER PRESSING START PRINT Insert or adjust the appropriate paper tray for copy size selected Closedocumentcoverfirmly. Closefrontdoorcompletely. COPYING DOES NOT RESUME AFTER MISHANDLED PAPER IS REMOVED CheckcopierdiagramonLCDscreenforadditionalindicationsofmishandledpaper. COPY QUALITY IS POOR Checkpaperfordampness,andreplaceifnecessary.
Troubleshooting CopyingTips(continued) CALL FOR PM IS DISPLAYED IN MESSAGE AREA Contact your service representative for Preventive Maintenance. THE BASIC SCREEN DOES NOT DISPLAY SETTINGS AS DESCRIBED IN USER’S MANUAL. Checkwiththekeyoperator,asInitialSettingsmaybechanged. PLEASE CHECK ORIGINAL Thismessagedisplayswhenthecopierdetectsanon-standardpapersizeontheplatenglass.Select copy size and press [START PRINT] key. 100% magnification will be selected automatically.
