CV_61862_ULG300A1_LB6.qxd 04.01.2011 11:59 Uhr Seite 1 A3 Laminator ULG 300 A1 6 A3 Laminator Operating instructions KOMPERNASS GMBH BURGSTRASSE 21 · D-44867 BOCHUM www.kompernass.com ID-Nr.
CV_61862_ULG300A1_LB6.qxd 04.01.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr Content Seite 1 Page 1. Intended use 2 2. Items supplied 2 3. Appliance description 2 4. Technical Data 2 5. Safety instructions 3 6. Suitable laminating pouches 4 7. Operating levels 4 8. Preparing for hot lamination 5 9. Preparing for cold lamination 6 10. Lamination process 6 11. Anti-Blocking Switch (ABS) 7 12. Trimming function 7 13. Cleaning and care 7 14. Storage 8 15. Disposal 8 16. Warranty and Service 8 17.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr A3 Laminator Seite 2 3. Appliance description q Foil guide rails (rear) w Cutting rail e Cutting head r Foil format restraint t Slot for manual foil feed y Indicator lamp "Ready" u ON/OFF Indicator lamp i Selector switch for hot and cold lamination 1. Intended use This laminator is intended exclusively for use in private households and for the hot and cold lamination of documents printed on paper or cardboard. Additionally, the documents can be trimmed.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr Seite 3 • Do NOT laminate any document which, together with the laminating pouch, would have a thickness of more than 1,0 mm. Should you do so, the laminating pouch could cant itself inside the laminating appliance. This would damage the laminating pouch, the document being laminated as well as the laminator. • Do not use an extension cable.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr Risk of fire! Seite 4 6. Suitable laminating pouches • Do not use the appliance in the vicinity of hot surfaces. • Do not place the appliance at locations exposed to direct sunlight. This could lead to overheating and cause irreparable damage. • Do not leave the appliance unattended when in use. • NEVER cover the ventilation slits on the top of the appliance while it is switched on.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr 8. Preparing for hot lamination ➩ ➩ ➩ ➩ ➩ ➩ • ➩ Seite 5 Insert the foil guide rails q in the designated holes on the rear of the laminator. Fold out the document supports s, so that the documents can be pulled in straight into the slot for manual foil feed t. Insert the plug of the laminator into a mains power socket. Provide a firm location for the appliance. Set the selector switch for hot and cold lamination i to "HOT ".
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr Seite 6 9. Preparing for cold lamination 10. Lamination process ➩ Lay the laminating pouch onto the pouch guide q. ➩ ➩ ➩ ➩ ➩ If you have previously performed hot lamination: After hot laminating, allow the laminator to cool down completely before beginning with cold lamination. Remember, the rollers inside the laminator will still be hot.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr ➩ If you do not want to start another lamination ➩ process, turn the foil thickness switch o to ABS (OFF) and withdraw the plug from the mains power socket. ➩ 11. Anti-Blocking Switch (ABS) • ➩ ➩ Hold the paper in a secure position with your left hand. To trim, press the cutting head e down with the right hand and then slide it with one pull or push over the document. 13.
IB_61862_ULG300A1_LB6 ➩ 14.01.2011 11:49 Uhr Seite 8 15. Disposal Then run a sheet of DIN A3 paper, folded in the middle (maximum thickness 1.0 mm) … Do not dispose of the appliance with your normal domestic waste. This product is subject to the provisions of European Directive 2002/96/EC. • without a laminating pouch and • with the fold first … slowly into the slot for manual pouch input t. ➩ Dispose of the appliance through an approved waste disposal centre or at your community waste facility.
IB_61862_ULG300A1_LB6 14.01.2011 11:49 Uhr Seite 9 17. Importer DES UK LTD Tel.: 0871 5000 700 (£ 0.10 / minute) E-Mail: support.uk@kompernass.com KOMPERNASS GMBH BURGSTRASSE 21 D-44867 BOCHUM, GERMANY www.kompernass.com Kompernass Service Ireland Tel.: 1850 930 412 (0,082 EUR/Min.) Standard call rates apply. Mobile operators may vary. E-Mail: support.ie@kompernass.