Installation Guide

Adjust the Handle Assembly (cont.)
Turn the handle to the detent setting that corresponds with
Accessory ″A.″ The handle should be in the vertical 12 o’clock
position for the 3-way installation or 4 o’clock for the 2-way
installation.
Remove the handle assembly and set aside.
To adjust for handle alignment:
NOTE: The spline adapter allows fine adjustment of the handle
alignment.
Remove the handle assembly and the valve stem adapter.
Reposition the spline adapter.
Reinstall the handle assembly and the valve stem adapter.
Check the alignment. Repeat this procedure until the handle
alignment is satisfactory.
Kohler Co. 5 1041514-2-K