Plumbing Product User Manual

4. Install the Faceplate and Handle

Remove and discard the plaster guard and/or dome, if installed.

Rotate the valve stem fully counterclockwise to the ″OFF″

position.

Install the faceplate onto the valve so the notch is to the bottom

and secure with screws. Do not overtighten the screws.

Install the graphics ring to the faceplate, and rotate it clockwise to

lock it in place.

Fit the sleeve onto the valve.

Secure the handle in place with the screw.

Press the plug button ﬁrmly into place.

Graphics Ring

Screw

Faceplate

Valve

Sleeve

Handle

Screw

Valve

Plug Button

114487-2-CC 6 Kohler Co.