Installation Guide

2. Measure and Cut the Threshold
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
Cover the drain with tape to avoid the loss of small parts.
Use a drop cloth to protect the shower surface.
Measure distance “A” between the shower walls and mark it on the threshold.
Measure 3/4″ (19 mm) from “A” and make a second mark on the threshold as shown.
Cut the threshold at the second mark and file any rough edges.
A
3/4"
(19 mm)
Cut
here.
Threshold
A
3/4"
(19 mm)
A
Kohler Co. 5 1314827-2-B