Installation Guide

2. Measure and Cut the Threshold
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
Cover the drain with tape to avoid the loss of small parts.
Use a drop cloth to protect the shower surface.
Measure distance “A” between the shower walls and mark it on the threshold.
Measure 11/16″ (17 mm) from “A” and make a second mark on the threshold as shown.
Cut the threshold at the second mark and file any rough edges.
Cut
here.
A
A
A
Threshold
11/16"
(17 mm)
11/16"
(17 mm)
Kohler Co. 5 1381418-2-B