Installation Guide

1. Confirm Ledge and Wall Compatibility
IMPORTANT! For proper door alignment and operation, confirm that the shower base/bath ledge and
walls meet the following requirements. Do not install the door if these requirements are not met.
There must be at least 3″ (76 mm) of flat surface on the shower base/bath ledge and walls.
Walls must be within 3/8″ (10 mm) of plumb.
The shower base/bath ledge must be level between the walls.
3"
(76 mm)
Min
3"
(76 mm)
Min
1381418-2-B 4 Kohler Co.