User's Manual

9
Flow Regulator Recommended
Flow Regulator Recommended
Unvented mains pressure system
The shower can be installed with a
unvented, stored hot water cylinder.
Pumped system
The shower can be installed with an inlet
pump (twin impeller). The pump must be
installed on the floor next to the hot water
cylinder.
Note! Flow regulator recommended to be
installed, refer to the ‘Discovery Fittings
Installation Manual’.
Mains pressurised instantaneous
hot water system (thermal store)
The shower can be installed with
systems of this type with balanced
pressures.
Note! Flow regulator recommended to be
installed, refer to the ‘Discovery Fittings
Installation Manual’.
Air Separation
90°
30°-60°
Flow Regulator Recommended