Specifications

Sunward
®
72" x 42" drop-in whirlpool bath
K-1164-CB
42" (1067 mm)
3/8" (10 mm)
2-7/8"
(73 mm)
3"
(76 mm)
72" (1829 mm)
10-13/16"
(275 mm)
1-1/2" Bath Drain
1-1/2"
(38 mm)
19-1/2"
(495 mm)
21"
(533 mm)
3-1/2"
(89 mm)
3-1/8"
(79 mm)
21"
(533 mm)
Pump/Control Access
20" (508 mm) W x 15" (381 mm) H
No change in measurements if connected
with drain illustrated. (K-11677)
Recommended faucet area
8"
(203 mm)
Max
1-1/2"
(38 mm)
Drop-in Rim
Detail
Lumbar
Angle 31°
Required Electrical Service
One dedicated circuit required, protected with Class A Ground-
Fault Circuit-Interrupter (GFCI). Outside North America, this
device may be known as a Residual Current Device (RCD).
Pump: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
Installation: Drop-in
Drain location: End
Basin area, bottom: 55-1/4" x 23-1/2" (1403 mm x 597 mm)
Basin area, top: 64-1/2" x 32" (1638 mm x 813 mm)
Weight: 112 lbs (50.8 kg)
Minimum floor load: 36 lbs/ft² (175.8 kg/m²)
Water depth: 15" (381 mm)
Water capacity: 75 gal (283.9 L)
Template: Drop-in, 1042557-7, required, included
Electrical component
rating:
Pump: 120 V, 7.5 A, 60 Hz
Pump speed: Single
Notes
Measure your actual product for rough-in
details.
Install this product according to the installation
instructions.
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
5-29-2021 04:38 - US/CA