Installation Instructions

3. Installation Checkout
Verify all connections are tight.
Remove the aerator from inside the spout by turning the housing
counterclockwise.
Verify the handles are in the OFF position, then turn on the main
water supply.
Check all connections for leaks; repair as needed.
Turn the handles to the ON position to run water through the
faucet.
Check all connections for leaks. Make any adjustments as needed.
Allow water to run through the spout to remove any debris.
Turn the handles to the OFF position.
Reinstall the aerator into the spout, then turn the housing
clockwise to secure the aerator to the spout.
Spout
Aerator
Housing
Kohler Co. 5 1069123-2-B