Homeowners Guide with Service Parts

Optional Remote Control
The remote control places the whirlpool functions at your fingertips to
further enhance your bathing experience. The functions of the remote
are identical to the user keypad. You can turn the whirlpool on and off,
turn the heater on and off, increase or decrease the water flow, turn the
neckjets on and off, and adjust the neckjet pulse speed with the press
of a button.
The mode selector button functions in the same way as the outer ring
on the keypad. When ″M″ is pressed, one of the modes will flash on
the user keypad. If ″M″ is pressed again, the next mode in clockwise
order will flash. When the desired mode is flashing, press ″OK″ to
activate it.
When the Flexjet mode is active, the arrows will increase or decrease
the water flow volume. When the neckjet mode is active, the arrows
will increase or decrease the neckjet pulse speed.
The waterproof remote control is designed to be used in the bath and
will float in the water.
Two AAA batteries are used in the remote control. To replace, simply
unscrew the endcap and insert the batteries, as shown above. Tighten
the endcap securely, making sure the endcap makes contact with the
seal.
Activates
Mode Selected
Mode
Selector
Power
Increases
Flow or
Pulse
Decreases
Flow or
Pulse
Kohler Co. 3 1024580-5-C