Rough In Guide

Product Information
Applicable products:
Bath whirlpool – drop-in K-1154
Bath whirlpool – tile flange K-1154-F
Fixture*:
Basin area:
Bathing well 44″ (1118mm)x36″ (914 mm)
Top area 56″ (1422 mm) x 43″ (1092 mm)
Weight 65 lbs (29.5 kg)
To overflow:
Water depth 15″ (381 mm)
Capacity 76 gal (287.7 L)
* Approximate measurements for comparison only.
Pump: V Hz A
1-speed 120 60 7.5
Required Electrical Service
Dedicated circuit required, protected with Class A
Ground-Fault Circuit-Interrupter (GFCI):
Pump/control 120 V, 15 A, 60 Hz
Locate the outlet behind the whirlpool and within 24″
(610 mm) of the pump.
Installation Notes
Install this product according to the installation guide.
Floor support under whirlpool must provide for a minimum of
36 lbs/square foot (175 kg/square meter) loading.
This fixture conforms to ANSI Standard Z124.1.2. All
dimensions are nominal.
54"
(1372 mm)
30-3/4"
(781 mm)
56-1/2"
(1435 mm)
30-3/4" (781 mm)
26" (660 mm)
54" (1372 mm)
1/2" (13 mm)
13"
(330 mm)
4-7/8"
(124 mm)
39-3/4" (1010 mm)
2-5/8"
(67 mm)
20-1/2"
(521 mm)
2-7/8"
(73 mm)
3" (76 mm)
1-1/2" OD
26" (660 mm)
Pump/Control Access
52-1/2"
(1334 mm)
135˚
25" (635 mm)
Tile Flange Detail
1-1/4"
(32 mm)
1-1/2"
(38 mm)
Drop-in Rim Detail
Drop-in Rim Style
Cut-out Detail
No change in measurements if connected
with drain illustrated. (K-11677 or K-11677M)
Roughing-In
K-1154, K-1154-F
PROFLEX
®
5454
BATH WHIRLPOOL
PROFLEX
®
5454 BATH WHIRLPOOL
1012955-1-
E