Specification Sheet

Slip-Fit Spout:
Notes
Technical Information
Install the product according to the installation
guide.
All product dimensions are nominal.
NOTICE: Risk of product damage. Long screws
for installing trim can damage the K-2971-KS
valve. Consult the trim installation guide to verify
if the thin wall installation kit (88526) is needed.
Install straight pipe or tube drop of 7" (178 mm)
to 18" (457 mm) with single elbow between the
valve and the wall-mount spout. Elbow must be
a 90 degree drop ell that is secured to rigid
framing.
ADA, CSA B651 compliant when installed to the
specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
12-28-2018 11:43 - US/CA
July
™
Rite-Temp
®
Bath and Shower Valve Trim
K-TLS98007-4