Specification
Required Accessories
K-304-* Rite-Temp
®
valve OR ❑ NA
K-2971-KS HiFlow Rite-Temp valve with stops OR ❑ NA
K-11748-K Rite-Temp valve with diverter OR ❑ NA
K-11748-KS Rite-Temp valve with diverter and stops ❑ NA
* For a complete listing of all the Rite-Temp valves, refer to the K-304-* Specification Sheet or Roughing-In Sheet.
Optional Accessories
88526 HiFlow Rite-Temp
®
thin wall installation kit ❑ CP Other ____
1016154 Deep roughing-in kit for Rite-Temp
®
valve (lever and cross handles) ❑ CP Other ____
Installation Notes
Install this product according to the installation guide.
NOTICE: Risk of product damage. Long screws, for
installing trim, can damage the K-2971-KS valve. Consult the
trim installation guide to verify if the thin wall installation kit
(88526) is needed.
Install this product according to the installation guide.
Avoid cross-flow conditions. Do not install shut-off device on
either valve outlet.
Cap shower outlet if deck-mount spout, diverter, or
handshower is connected to spout outlet.
Install straight pipe or tube drop of 7″ (17.8 cm) to 18″
(45.7 cm) with single elbow between valve and wall-mount
spout.
4"
(10.2 cm) D.
6-1/2"
(16.5 cm) D.
1/2"-14
NPT
4"
(10.2 cm) D.
7-3/4" (19.7 cm)
7-3/4" (19.7 cm)
Lever
Handle
Cross
Handle
_90 Bath Spout
_35 Bath Spout
5-1/2"
(14 cm)
10-5/8" (27 cm)
3-1/2"
(8.9 cm)
5-5/16"
(13.5 cm)
4-7/16"
(11.3 cm)
10" (25.4 cm)
To Spout
(Bath Only)
48" (121.9 cm)
To Floor
(Shower Only)
72" (182.9 cm)
78" (198.1 cm)
To Floor (Typical)
_35
Top of Bath
1/2"-14
NPT
Product Diagram
PURIST
®
PURIST
®
BATH AND SHOWER FAUCET TRIM
Page2of2
1031692-4-
C