Installation Guide

1. Hardware Placement for K-99688
Measure and mark the dimensions for the hardware as shown
above.
Drill a 3/16″ (21 mm) hole at each marking.
Insert a screw through each hole from the inside. Count the
number of notches that appear from the other side.
Remove the screw. Using a pair of side cutters, cut the screw at
the appropriate notch. Repeat for all screws.
Insert a screw through each hole and align them with the
handles. Thread the screws into the handles.
Drawer Pull
Location
Door Pull
Location
1-1/2" (38 mm)
3"
(76 mm)
3" (76 mm)
2-1/8"
(54 mm)
3" (76 mm)
Centered
Side to Side
Kohler Co. 3 1216526-2-F