Installation Guide

2. Connect the Supplies

CAUTION: Risk of restricted waterﬂow and product

damage. Use extreme care to avoid kinking and twisting the

supply hoses. Hoses must not be taut after installation.

Install two 3/8″ supply tees with supply stops below the

mounting surface. Ensure the supply tees do not interfere with

items below the sink.

NOTE: If the supply hoses must be coiled, maintain an inside coil

diameter of at least 3″ (7.6 cm).

Connect and tighten the supply hoses to the supply tees.

Feed the spray hoses with handspray through the assembly until

the handspray is properly seated.

Connect and tighten the handspray hose outlet to the valve body

inlet.

Valve Body

Inlet

Supply

Hoses

3/8" Supply

Tees with

Supply Stops

Spray Hose

Handspray

3" (7.6 cm)

or Larger

Handspray

Hose Outlet

1069077-2-A 4 Kohler Co.