Installation Guide

6. Install the Lift Rod Assembly
NOTE: If more than one lift rod is supplied, choose the one that
most comfortably extends to the diagonal length between the closed
drain stopper to the overflow ell.
Measure from the rim to the center of either top hole of the
overflow ell.
Transfer this measurement to the inside of the bath, as illustrated.
Position the lift rod assembly directly on the drain stopper.
Adjust the length of the lift rod assembly so the lift rod eye is
centered over the transferred measurement, as illustrated.
Lift rod
Spring
Adjusting
Screw
Adjusting
Block
Assemble lift rod
components.
Adjusting
Rail
Lift Rod
Eye
Set proper length for
lift rod assembly.
Holes of
Overflow Ell
Transfer
measurement
here.
First Measurement
1054248-2-A 8 Kohler Co.