Installation Guide
16. Install the Inside Panel
CAUTION: Risk of product damage: Once installed, do not move the panel close to the wall because the
top bumpers are not installed at this time.
NOTE: The corner protectors should still be installed on the panel at this time.
NOTE: The rollers face the inside of the shower and the label faces the outside of the shower.
With help, from outside the shower, lift the panel and place the bottom into the inside channel in
the centerguide.
Lift the panel just enough to place a roller into one notch on the header. Then slide the panel over
so the second roller is aligned with the other notch in the header.
Verify that the bottom of the door panel is still in the inside channel of the centerguide.
Kohler Co. 19 1380408-2-B