Instructions / Assembly

4. Position the Threshold
NOTICE: The threshold must sit on a flat surface.
If needed, file the ends of the threshold to match the corner radius of the shower wall.
Insert the threshold into the wall jamb with the groove down and the short end of the threshold
facing the inside of the shower.
Align the threshold so that it is an even distance from the shower base/bath ledge along its entire
length.
Tape the threshold securely in place and mark its location.
1/8"
(3 mm)
Groove
1/8"
(3 mm)
Kohler Co. 7 1314827-2-A