Installation Guide

11. Secure the Header
Steam Door
From inside the shower, hold the header down while sliding the header expander up to the ceiling.
Using the pre-drilled holes in the wall jambs as guides, drill through the header and expander using
a 1/8″ drill bit.
Secure the header in place using two #8 x 3/4″ flathead screws.
Non-Steam Door
From inside the shower, press the header expander fully into the header.
Using the pre-drilled holes in the wall jambs as guides, drill through the header and expander using
a 1/8″ drill bit.
Secure the header in place using two #8 x 3/4″ flathead screws.
Screw
Header
Inside of
Shower
Kohler Co. 15 1144162-2-B