Installation Guide

Tools and Materials
Before You Begin
WARNING: Risk of serious injury. Damage prior to installation can result in glass shattering.
Inspect the glass and all parts for damage before installation.
WARNING: Risk of serious injury. Improper installation can result in glass shattering. Follow all
installation instructions.
NOTICE: Do not touch the edges of the tempered glass with tools or any other hard objects. Do not set
the unframed tempered glass directly on the floor or any hard surface.
WARNING: Risk of serious injury. Do not cut tempered glass. Tempered glass will shatter if cut.
WARNING: Risk of serious injury. Shower door and side panels can shatter. Regularly inspect the
glass and all parts for damage, missing, or loose parts.
WARNING: Risk of serious injury. Always wear safety glasses while cutting and drilling.
IMPORTANT! Leave this manual for the end user. Read these instructions before installing or using this
product.
NOTE: Record the model number on the Homeowners Guide. The proper model number will enable our
customer service representatives to quickly help you if needed.
IMPORTANT! This door is designed to accommodate walls that are less than 3/8″ (1 cm) out of plumb.
Verify the area the door will be attached to is within 3/8″ (1 cm) or better of plumb. The door may not
function properly if the wall is more than 3/8″ (1 cm) out of plumb.
Your new Kohler door can be installed with the door opening to either the right or left. Install the
door with the pivot side away from the showerhead for best results. These instructions show the
door installed with a left hinge. Doors that hinge on the right would be opposite.
Before starting the installation, lay out and identify all of the parts. Inspect them for damage.
The shower receptor should be installed and prepared at this time, including finished wall materials.
Utility KnifePencil
Level
Tape Measure
File
Scissors
Phillips
Screwdriver
Silicone Sealant
Drill & Assorted
Drill Bits
Safety Glasses
Caulk Gun
Masking Tape
3/32" & 5/64" Hex
Wrench (Supplied)
Miter Saw or Hack Saw with
32-teeth per inch blade
Plus:
• Drop Cloth
• Rubber Mallet
• Wood Shims
• Drill Bits:
7/64", 1/8", 5/16", 3/8"
1144162-2-B 2 Kohler Co.