Installation Guide

Install the Handles
NOTE: It is recommended two people perform these installation
steps.
NOTE: The appearance of the handles may differ from those
illustrated. The installation instructions still apply.
Gently seperate the handles.
On the handles with the attached pins, confirm there is one
spacer on each pin, with the tapered side of the spacer facing
toward the glass.
Position the handle so the pins are through the mounting holes of
the door. Hold the handle in place.
With the tapered side of the spacer facing toward the glass, slide
a spacer on each pin from the other side of the door.
Place the remaining handle on the pins.
IMPORTANT! Do not overtighten the hex screws.
Insert and tighten the hex screws (provided) to the handle. Use a
1/8″ hex wrench (provided).
Care and Cleaning
For best results, keep the following in mind when caring for your
KOHLER product:
Hex
Screw
Hex Wrench
Spacer
Handle
Handle
Pin
Spacer
Kohler Co. 3 1063556-2-B