Installation Guide

Instale el carril inferior
Aplique una tira de 1/4″ (6 mm) de sellador de silicona en la ranura del dorso del
carril.
Instale el carril inferior con el sellador hacia abajo y la pata frontal hacia el
exterior de la ducha, a lo largo de la marca de lápiz que hizo previamente.
5. Install the Wall Jambs
IMPORTANT! Risk of product damage. Bumper installation is critical. The bumpers
keep the door panel from contacting the frame, which can result in shattering glass.
Insert a #8-18 x 1-1/2″ panhead screw through each of the four bumpers.
Place a wall jamb over the bottom track. Align the holes in the wall jamb with the
holes in the wall.
Align the holes in the wall jamb with the holes in the wall and secure the wall
jamb to the wall with #8-18 x 1-1/2″ panhead screws. Bumpers should be located
in the top and bottom holes. Do not overtighten. The bumper may lose its shape.
Repeat the procedures with the other wall jamb.
Bumper/Amortisseur/Tope
#8-18 x 1-1/2"
Panhead Screw
Vis tte ronde
#8-18 x 1-1/2"
Tornillo de cabeza
redonda del
#8-18 x 1-1/2"
Bottom Track
Rail infrieur
Carril inferior
Kohler Co. 13 1063221-2-G