Installation Guide

1. Preparation
Install the water supplies and drain piping according to the
roughing-in information.
Cut along the template line where indicated for the countertop
opening.
Position the sink template on the countertop.
Check the clearance between the sink, faucet, backsplash and
cabinet. Adjust the template accordingly.
Trace around the sink template on the countertop with a pencil.
NOTE: You may require different, more specialized tools to install
this sink to countertop materials other than wood or wood
composites.
Measure the thickness of the countertop.
Determine the threaded shank length of the faucet.
Compare the measurements to verify that the faucet will fit on
the countertop as required. If the faucet will not fit, you will need
to select a different faucet or countertop.
Kohler Co. 3 1004605-2-F