Installation Guide

1. Roughing-In and Preparation
IMPORTANT! Before installing this sink, verify that the distance
from the top of the cabinet to the top of the doors (A) is greater
than the apron height.
TIP: Apply painter’s tape to the cabinet to mark cuts and to protect
the cabinet surfaces when cutting.
Position the template on the front of the cabinet, flush with the
top and centered left to right. Secure the template with tape.
Trace the template and remove.
Cut the cabinet along the traced line.
A =
A
Apron
8-13/16"
(224 mm)
Top of Cabinet to Top of Doors
Trace the template onto
the cabinet and cut along
the traced line.
Kohler Co. 3 1218029-2-D