Use and Care Manual
Wood Furniture
For best results, keep the following in mind when caring for your KOHLER®
product:
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray
that lands on nearby surfaces.
Do not allow cleaner to soak.
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean
surfaces.
For warranty information call 1-800-4KOHLER (1-800-456-4537).
* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the
water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being
cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.
_____________________________________________________________________________________________
Blot spills immediately with a soft, damp cloth.
Test cleaners in a discrete location first, such as the inside of a door, to ensure that there is no adverse reaction.
Do not expose wood furniture to direct sunlight, drying heat sources or dampness.
Protect wood surfaces by using felt, leather or cork under accessories. Never slide objects across wood surfaces.
Dust frequently with a soft cloth in the direction of the grain.