Installation Guide

Cut the Countertop - Retrofit
IMPORTANT! To avoid damaging visible cabinet surfaces, cut the
countertop in the order instructed.
TIP: To prevent chipping the laminate, apply painter’s tape to the
edge of the countertop before cutting.
First, cut the countertop along the inside marked line.
Second, carefully cut away from the cutout to the marked notch
line. Use care not to damage the cabinet face.
Repeat for the other side.
Third, carefully cut in from the edge of the countertop to intersect
with the previous cut. Use care not to damage the cabinet face.
Repeat for the other side.
Fourth, cut away the top rail and discard.
4. Remove
top rail.
1. Cut inside line.
Do not cut
beyond
marked line.
2. Cut away from cutout,
flush with cabinet face.
3. Cut to intersect
with previous cut.
1166708-2-B 14 Kohler Co.