Installation Guide

Thank You For Choosing Kohler Company
Thank you for choosing Kohler Company. Your Kohler Company
product reflects the true passion for design, craftsmanship, artistry, and
innovation Kohler Company stands for. We are confident its
dependability and beauty will surpass your highest expectations,
satisfying you for years to come.
All the information in this guide is based upon the latest product
information available at the time of publication. At Kohler Company,
we strive to fulfill our mission of improving the level of gracious living
for each person who is touched by our products and services. We
reserve the right to make changes in product characteristics, packaging,
or availability at any time without notice.
Please take a few minutes to review this guide. If you encounter any
installation or performance problems, please call 1-800-4KOHLER
(1-800-456-4537) from within the USA and Canada, or 001-877-680-1310
from within Mexico.
Tools and Materials
Before You Begin
IMPORTANT! The slide bar must be mounted to stud framing
supports at both the top and bottom mounting locations. Plastic wall
anchors will not support the slide bar. Do not use or depend on
plastic wall anchors to attach the slide bar.
Observe all local plumbing and building codes.
NOTE: The slide bar should not be installed in an area 24″ (61 cm)
to 48″ (121.9 cm) from the floor (the critical support area as defined
in ASTM F446).
Blade
Screwdriver
Drill and 3/16" Bit
Tape
Measure
Level
Pencil
Sealant
1046145-2-C 2 Kohler Co.