Use and Care Manual

Stainless Steel Kitchen Sinks
For best results, keep the following in mind when caring for your KOHLER®
product:
Always test your cleaning solution on an inconspicuous area before applying to the entire surface.
Wipe surfaces clean and rinse completely with water immediately after applying cleaner. Rinse and dry any overspray
that lands on nearby surfaces.
Do not allow cleaner to soak.
Use a soft, dampened sponge or cloth. Never use an abrasive material such as a brush or scouring pad to clean
surfaces.
For warranty information call 1-800-4KOHLER (1-800-456-4537).
* Success with cleaners and procedures is dependent upon such factors as the hardness and temperature of the
water, using exact measurements of ingredients, changes in cleaning formulas and the condition of the product being
cleaned. Since there are variations within these factors, Kohler cannot guarantee the effectiveness of the formulas.
_____________________________________________________________________________________
Clean stainless steel at least once a week.
Always apply stainless steel cleaner/polish with a nonabrasive cloth or sponge, working with, not across, the grain.
Do not use steel wool, wire brushes or abrasive sponge pads.

Summary of content (2 pages)