Specification

Technical Information
Fixture:*
Basin area 17-3/8″ (44.1 cm) x 11-1/8″ (28.3
cm)
Water depth 5-5/8″ (14.3 cm)
Drain hole 7/8″ (2.2 cm) D.
* Approximate measurements for comparison only.
Holes K-2699-8 K-2699-4 K-2699-1
Spout 1-3/8″ D.
(3.5 cm)
1-1/4″ D.
(3.2 cm)
1-3/8″ D.
(3.5 cm)
Faucet 1-3/8″ D.
(3.5 cm)
1-1/4″ D.
(3.2 cm)
Included components:
Cut-out template 1155261-7
Installation Notes
Install this product according to the installation guide.
Spout must be 5″ (12.7 cm) long (min) for adequate clearance
into the lavatory when installed with the centerline as shown.
Spout must be tall enough to clear 3″ (7.6 cm) rim height and
provide a 1″ (2.5 cm) air gap per ASME A112.1.1.
NOTICE: Countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current one
provided by Kohler Co. (call 1-800-4-KOHLER). Kohler Co. is
not responsible for cutout errors when the incorrect cut-out
template is used.
Will comply with ADA when installed per Section 606
Lavatories of the Act.
Recommended ADA Installation
24" (61 cm)
34"
(86.4 cm)
27"
(68.6 cm)
Min
11"
(27.9 cm)
9"
(22.9 cm)
Min
3-11/16"
(9.4 cm)
8"
(20.3 cm)
Min
16-1/2"
(41.9 cm)
20-1/8" (51.1 cm)
7-5/8"
(19.4 cm)
2-5/16"
(5.9 cm)
2" (5.1 cm)
4" (10.2 cm)
4" (10.2 cm)
3/8" Hot
3/8" Cold
1-1/4" OD
K-2699-1
K-2699-4
K-2699-8
2-5/16"
(5.9 cm)
2-5/16"
(5.9 cm)
14"
(35.6 cm)
7-3/8"
(18.7 cm)
13-7/8"
(35.2 cm)
Product Diagram
BRYANTTM OVAL
BRYANTTM OVAL SELF-RIMMING LAVATORY
Page2of2
1154759-4-
B