Specification

Technical Information
Fixture*:
Basin area Ø 14-3/4″ (375 mm)
Water depth 4-9/16″ (116 mm)
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Included component:
Cut-out template 1091072-7
Installation Notes
Install this product according to the installation guide.
Product does not have overflow.
NOTICE: The countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current
cut-out template provided by the Kohler Co. (call
1-800-4KOHLER). Kohler Co. is not responsible for errors
when the incorrect cut-out template is used.
The spout must be a minimum of 5″ (127 mm) long for
adequate clearance into the bathroom sink when installed with
the centerline, as shown.
The spout must be tall enough to clear the 3-1/16″ (78 mm)
rim height and provide a 1″ (25 mm) air gap per ASME
A112.1.2.
Will comply with ADA when installed per section 606
Lavatories of the Act.
3/8" Hot
3/8" Cold
1-1/4" OD
4" (102 mm)
Ø 16-1/2" (419 mm)
8-1/4" (210 mm)
24" (610 mm)
Recommended ADA Installation
Ø 14-3/4"
(375 mm)
3-1/16"
(78 mm)
6-1/2"
(165 mm)
12-1/8"
(308 mm)
14"
(356 mm)
9"
(229 mm)
Min
8"
(203 mm)
Min
34"
(864 mm)
27"
(688 mm)
Min
1-7/8"
(48 mm)
11" (279 mm)
Product Diagram
INSCRIBETM
INSCRIBETM WADING POOL
®
BATHROOM SINK
Page2of2
1091071-4-
C