Specification

Technical Information
Fixture*:
Basin area 19-11/16″ (500 mm) x 12-7/16″
(316 mm)
Water depth 2-1/8″ (54 mm) without overflow
9/16″ (14 mm) to overflow
Drain hole Ø 1-3/4″ (44 mm)
* Approximate measurements for comparison only.
Included component
Cut-out template 1066138-7
Installation Notes
Install this product according to the installation guide.
Product K-2353 is less overflow, K-2354 is with overflow.
IMPORTANT! Product rests on a countertop. Consider height
of product when designing installation.
Choose a faucet that will provide adequate clearance and will
direct the water stream to the center of the bathroom sink.
When installing a pop-up drain to this bathroom sink, it may
be necessary to bend the drain linkage to allow proper reach
to the faucet lift rod.
NOTICE:The countertop manufacturer or cutter must use the
cut-out template provided with the product, or a current
cut-out template provided by Kohler Co. (1-800-4KOHLER).
Kohler Co. is not responsible for cutout errors when an
incorrect cut-out template is used.
17-3/16" (437 mm)
K-2353-1
K-2353-4K-2353-8
21-5/16" (541 mm)
20-3/16" (513 mm)
1-1/4" OD
3/8" Cold
4" (102 mm)
4" (102 mm)
4" (102 mm)
3/8" Hot
24" (610 mm)
Recommended ADA Installation
3-7/16" (87 mm)
3-7/16"
(87 mm)
3-7/16" (87 mm)
18-1/16"
(459 mm)
9"
(229 mm)
4-1/16"
(103 mm)
4-1/8"
(105 mm)
14"
(356 mm)
9-3/4"
(248 mm)
34"
(864 mm)
11"
(279 mm)
8" (203 mm)
Min
9" (229 mm)
Min
27"
(686 mm)
Min
Product Diagram
YIN-YANG
®
YIN-YANG
®
WADING POOL
®
BATHROOM SINK
Page2of2
1073814-4-
E