Installation Guide

Troubleshooting (cont.)
Troubleshooting Table
Symptoms Probable Cause Recommended Action
6. The status LED
is blue, but the
audio signal is
intermittent.
A. The BLUETOOTH
device signal is
weak.
A. Move the
BLUETOOTH device
closer to the
amplifier location.
Under normal
conditions, the
maximum range is
30’ (9.14 m).
Compliance
Contains: Kohler Company, Model: 1263840, FCC ID: N82KOHLER017,
IC: 4554A-KOHLER017, CE: CE2200
FCC Interference Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including
interference that may cause undesired operation.
The circular auxiliary-in port is not an ethernet communication port.
Do not connect it to an ethernet network.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
1298482-2-A 12 Kohler Co.