Specification Sheet

1-1/2"
Notes
Required Electrical Service
Measure your actual product for rough-in details.
One circuit required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI) or Residual Current Device (RCD).
Install this product according to the installation
instructions.
120 V, 15 A, 60 HzHeated Surface:
The hot water supply should be 70% of the
capacity of the bath or greater. Installations will
vary.
Technical Information
All product dimensions are nominal.
Drop-inInstallation:
Provide one grounded electrical outlet within 24"
(610 mm) of each component.
EndDrain location:
50-3/8" x 19-5/8" (1280 mm x 498 mm)Basin area, bottom:
This product is designed for drop-in installation
only. It is not suited for use in a three-wall alcove
with an overhead shower.
57-5/16" x 24-1/16" (1456 mm x 611 mm)Basin area, top:
76 lbs (34.5 kg)Weight:
45.4 lbs/ft² (221.7 kg/m²)Minimum floor load:
ADA compliant when installed to the specific
requirements of these regulations.
15-5/16" (389 mm)Water depth:
66 gal (249.8 L)Water capacity:
Drop-in, 64-1/2" x 30-1/2" (1638 mm x
775 mm)
Cutout:
Heated Surface: 120 V, 0.5 A, 50/60 Hz,
65 W
Electrical component
rating:
USA/Canada: 1-800-4KOHLER (1-800-456-4537)
Kohler Co. reserves the right to make revisions without notice to product specifications.
For the most current Specification Sheet, go to www.kohler.com.
3-27-2016 06:09
Archer
®
5.5' Bath
K-1948-W1